Hi,
I'm currently running 3006.102.4 on my ax86u_pro.
On this I have configured a wireguard server and an openvpn client (to external vpn provider).
Here are my vpn director rules
The wireguard server has 'allow dns' and 'enable nat - ipv6' enabled, with tunnel IPv4 Address of 192.168.11.1/32.
The wireguard client .conf file currently includes the following lines:
Address = 192.168.11.3/32
DNS = 192.168.11.1
AllowedIPs = 0.0.0.0/0,192.168.10.0/29
I have also tried DNS = 192.168.10.1
My issue is that I'm unable to resolve any of the devices on 192.168.10.0/29 while I'm remotely connected to my router using wireguard.
Accessing the devices through ip work and I am able to browse the web (and have verified that my public address is an address received from ovpn1).
what else can I give as info...
dns director global redirection is set to router.
wan dns settings:
Thank you in advance for reading and possibly helping me out.
I'm currently running 3006.102.4 on my ax86u_pro.
On this I have configured a wireguard server and an openvpn client (to external vpn provider).
Here are my vpn director rules
The wireguard server has 'allow dns' and 'enable nat - ipv6' enabled, with tunnel IPv4 Address of 192.168.11.1/32.
The wireguard client .conf file currently includes the following lines:
Address = 192.168.11.3/32
DNS = 192.168.11.1
AllowedIPs = 0.0.0.0/0,192.168.10.0/29
I have also tried DNS = 192.168.10.1
My issue is that I'm unable to resolve any of the devices on 192.168.10.0/29 while I'm remotely connected to my router using wireguard.
Accessing the devices through ip work and I am able to browse the web (and have verified that my public address is an address received from ovpn1).
what else can I give as info...
dns director global redirection is set to router.
wan dns settings:
Thank you in advance for reading and possibly helping me out.
Last edited:
