ASUS 89X - Slow WiFi

[ben29]

Using MACBOOK AIR m2 or more devices close to the router

getting good speed around 1GB

Loaded time
141 ms

WIFI Settings:

running ifconfig on the router:
a lot of errors. and that's too much - 12 days uptime!

wifi0 Link encap:UNSPEC HWaddr F0-2F-74-C4-E8-24-00-00-00-00-00-00-00-00-00-00


UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1


RX packets:62303873 errors:29 dropped:0 overruns:0 frame:0


TX packets:149793293 errors:52847 dropped:52847 overruns:0 carrier:0


collisions:0 txqueuelen:2699


RX bytes:2086879924 (1.9 GiB) TX bytes:2899420443 (2.7 GiB)





wifi1 Link encap:UNSPEC HWaddr F0-2F-74-C4-E8-20-00-00-00-00-00-00-00-00-00-00


UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1


RX packets:37985072 errors:2 dropped:0 overruns:0 frame:0


TX packets:7758344 errors:53472 dropped:53472 overruns:0 carrier:0


collisions:0 txqueuelen:2699


RX bytes:2831202684 (2.6 GiB) TX bytes:1251936586 (1.1 GiB)

how can i improve my WIFI?

thanks!

 

[Tech9]

getting good speed around 1GB

Where is the slow Wi-Fi then?

 

[ben29]

Where is the slow Wi-Fi then?

Wifi disconnected a lot
Website loading slow some times

 

[ben29]

Where is the slow Wi-Fi then?

And the latency is very high 120-200

And my computer is very close to the router

 

[Tech9]

For better Wi-Fi stability don't use 160MHz wide channel and DFS range. For better compatibility with clients use WPA2/WPA3 authentication.

 

[ben29]

For better Wi-Fi stability don't use 160MHz wide channel and DFS range. For better compatibility with clients use WPA2/WPA3 authentication.

thanks!

1. you mean to uncheck the "Auto select channel including DFS channels" ?
2. Enable TX Bursting show be enabled?

 

[sfx2000]

. Enable TX Bursting show be enabled?

Tx Bursting only comes into play for legacy A/G connections

 

[ben29]

Tx Bursting only comes into play for legacy A/G connections

thx.

so i disable "Auto select channel including DFS channels" and 160hz

no really improve on latency