joeschmuck
Occasional Visitor
I have a very strange issue. I am running Merlin on an RT-AX86U ZAKU II Edition, don't recall the version of Merlin but it was updated a few months ago.
The issue: I cannot access any hardware on my LAN, which includes the router, using a hardwired computer.
I can access the internet just fine, my NAS shares are working fine as well.
When did this apparently start? Saturday evening on my TrueNAS server I disabled Tailscale, then the NAS rebooted, and it should not have. I was unable to enter the NAS GUI after that, and it had worked previously as I was in the GUI to disable the Tailscale app. I suspect this caused some strange glitch, maybe, or was the result of the router issue. I was using SSH into the NAS previously as well all day long. Very strange.
What have I done?
I have cycled power to the router, twice. It is apparently working to some extent.
I tried to access the router via WiFi (laptop) as well, same result, did not work, but the internet and NAS shares are working.
I unplugged the NAS from the LAN, rebooted the router, still no joy.
This is not the end of the world, but not being able to access my NAS, or SSH into anything on the network is a problem.
I am resisting a hard reset until someone suggests that. I do have quite a bit configured in the router that I'm sure I saved, last year, but not current. Guess I learned a painful lesson, yet again, if I have to do a hard reset.
Unfortunately my backup router is being used at a friends house, not close by. It is an older router, maybe time to purchase a new one to update my hardware, but that is not the solution for the current problem.
Advice appreciated
The issue: I cannot access any hardware on my LAN, which includes the router, using a hardwired computer.
I can access the internet just fine, my NAS shares are working fine as well.
When did this apparently start? Saturday evening on my TrueNAS server I disabled Tailscale, then the NAS rebooted, and it should not have. I was unable to enter the NAS GUI after that, and it had worked previously as I was in the GUI to disable the Tailscale app. I suspect this caused some strange glitch, maybe, or was the result of the router issue. I was using SSH into the NAS previously as well all day long. Very strange.
What have I done?
I have cycled power to the router, twice. It is apparently working to some extent.
I tried to access the router via WiFi (laptop) as well, same result, did not work, but the internet and NAS shares are working.
I unplugged the NAS from the LAN, rebooted the router, still no joy.
This is not the end of the world, but not being able to access my NAS, or SSH into anything on the network is a problem.
I am resisting a hard reset until someone suggests that. I do have quite a bit configured in the router that I'm sure I saved, last year, but not current. Guess I learned a painful lesson, yet again, if I have to do a hard reset.
Unfortunately my backup router is being used at a friends house, not close by. It is an older router, maybe time to purchase a new one to update my hardware, but that is not the solution for the current problem.
Advice appreciated