Voxel Custom firmware build for R7800 v. 1.0.2.115SF

[Voxel]

Continuation of

. . .
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-113sf.93764/
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-114sf.94330/

New version of my custom firmware build: 1.0.2.115SF.

Changes (vs 1.0.2.114SF):

1. Toolchain: GCC is upgraded 14.2.0->15.1.0.
2. Toolchain: Go is upgraded 1.24.2->1.24.4.
3. dropbear package is upgraded 2024.87->2025.88 (fixing CVE-2025-47203).
4. fcgi package is upgraded 2.4.4->2.4.6 (fixing CVE-2025-23016).
5. DNSCrypt Proxy v.2 is upgraded 2.1.8->2.1.12.
6. curl package is upgraded 8.13.0->8.14.1.
7. coreutils package (sort/gnu-date) is upgraded 9.6->9.7.
8. ca-certificates package is upgraded 20241223->20250419.
9. sqlite (minidlna) package is upgraded 3460100->3490100.
10. unbound package (used in stubby) is upgraded 1.22.0->1.23.0.
11. ethtool package is upgraded 6.11->6.14.
12. ubus package is upgraded 2025-01-02->2025-05-16.
13. iperf3 package is upgraded 3.18->3.19.
14. libiconv-full package is upgraded 1.17->1.18.
15. libubox package is upgraded 2024.03.29->2024-12-19.
16. libusb package is upgraded 1.0.28->1.0.29.
17. Multiple packages: get ready to compile by gcc 15.1.0 compiler.
18. Change 'run-ramfs' script to use 'libiconv.so.2.7.0' (libiconv-full 1.18).
19. Host tools: upgrade libtool to 2.5.4.
20. Host tools: upgrade m4 to 1.4.20.
21. Host tools: upgrade quilt to 0.69.
22. Host tools: upgrade mpfr to 4.2.2.
23. Host tools: synchronize bison with OpenWRT.

The link is:

https://www.voxel-firmware.com (thanks to vladlenas for his help with hosting).

Voxel.

 

[NetBytes]

@Voxel Thank You!

 

[scooter2765]

Thanks!

 

[Kitsap]

Got it. Thank you!

 

[Keeper2k5]

Thank you! @Voxel

 

[Panner]

Thanks Voxel - smooth update as usual

 

[HELLO_wORLD]

Thank you Voxel.

 

[Luizk]

thank you kindly!

 

[ChaosC]

Thank you v.much Voxel!

 

[IItazII]

My router has gone crazy; it resets to factory settings every time it reboots. Any solutions? I've already tried clearing the NVRAM and installing older firmware, but nothing.

 

[HELLO_wORLD]

My router has gone crazy; it resets to factory settings every time it reboots. Any solutions? I've already tried clearing the NVRAM and installing older firmware, but nothing.

Looks like a defective nvram chip. Look into that thread: https://www.snbforums.com/threads/r7800-will-no-longer-save-settings-after-reboot.62773/page-14

 

[spocko]

Smooth update to 115, thanks Voxel!

 

[IItazII]

Is it normal for QOS to be broken at 300 Mbps or more, that is, when I do a speed test and limit the Mbps to 300 when I have 380 Mbps and the speed test shows me those 380 Mbps instead of the 300 Mbps that I limited, is this normal?

 

[Remy561]

(Finally) updated both my routers from 1.0.2.113SF to 1.0.2.115SF and Kamoji from 5.5b45 to 5.5b47.
All this time my devices were online with zero issues. And now running smoothly again on the latest versions.
Thanks a lot guys! <3

 

[staticfree]

Continuation of

. . .
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-113sf.93764/
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-114sf.94330/

New version of my custom firmware build: 1.0.2.115SF.

Changes (vs 1.0.2.114SF):

1. Toolchain: GCC is upgraded 14.2.0->15.1.0.
2. Toolchain: Go is upgraded 1.24.2->1.24.4.
3. dropbear package is upgraded 2024.87->2025.88 (fixing CVE-2025-47203).
4. fcgi package is upgraded 2.4.4->2.4.6 (fixing CVE-2025-23016).
5. DNSCrypt Proxy v.2 is upgraded 2.1.8->2.1.12.
6. curl package is upgraded 8.13.0->8.14.1.
7. coreutils package (sort/gnu-date) is upgraded 9.6->9.7.
8. ca-certificates package is upgraded 20241223->20250419.
9. sqlite (minidlna) package is upgraded 3460100->3490100.
10. unbound package (used in stubby) is upgraded 1.22.0->1.23.0.
11. ethtool package is upgraded 6.11->6.14.
12. ubus package is upgraded 2025-01-02->2025-05-16.
13. iperf3 package is upgraded 3.18->3.19.
14. libiconv-full package is upgraded 1.17->1.18.
15. libubox package is upgraded 2024.03.29->2024-12-19.
16. libusb package is upgraded 1.0.28->1.0.29.
17. Multiple packages: get ready to compile by gcc 15.1.0 compiler.
18. Change 'run-ramfs' script to use 'libiconv.so.2.7.0' (libiconv-full 1.18).
19. Host tools: upgrade libtool to 2.5.4.
20. Host tools: upgrade m4 to 1.4.20.
21. Host tools: upgrade quilt to 0.69.
22. Host tools: upgrade mpfr to 4.2.2.
23. Host tools: synchronize bison with OpenWRT.

The link is:

https://www.voxel-firmware.com (thanks to vladlenas for his help with hosting).

Voxel.

It's been a while since I looked into this on my old R7800. Been using Voxel's firmware running great through the years. I just updated to this new firmware and it's running smooth as always. Thanks Voxel! I've recently noticed however that the Netgear router has been periodically attempting to connect to various ipaddresses in various countries around the world. I have a Unifi Dream Router 7 as the main router and using the Netgear R7800 as an Access Point only. The Dream Router 7 security protections have been blocking attempts to contact or connect to various ipaddress flagging them as "Concerning..." P2P attempts to various countries like North Korea, China, Russia, Australia, Singapore, Indonesia, France, New Zealand, Ukraine, USA, etc. to name just a few recently flagged as "Intrusion Prevention".
I am sure there probably a legit explanation of what is running in this firmware that is trying to communicate with the outside world but am mentioning here to make sure it is safe and get an explanation of what is doing this. Other than that, no problems with this firmware running fine. BTW, loading previous firmware(s) also showed the same P2P attempts. So it is not just this newer firmware version.