Custom firmware build for R9000/R8900 v. 1.0.3.11HF/1.0.3.11HF-HW

[Voxel]

Continuation of:

https://www.snbforums.com/threads/custom-firmware-build-for-r9000.40125/
https://www.snbforums.com/threads/custom-firmware-build-for-r9000-v-1-0-2-41hf-1-0-2-41hf-hw.40481/
https://www.snbforums.com/threads/custom-firmware-build-for-r9000-v-1-0-2-42hf-1-0-2-42hf-hw.40688/
https://www.snbforums.com/threads/custom-firmware-build-for-r9000-v-1-0-2-43hf-1-0-2-43hf-hw.41167/
https://www.snbforums.com/threads/custom-firmware-build-for-r9000-v-1-0-2-44hf-1-0-2-44hf-hw.41301/
https://www.snbforums.com/threads/custom-firmware-build-for-r9000-v-1-0-2-45hf-1-0-2-45hf-hw.41820/
https://www.snbforums.com/threads/custom-firmware-build-for-r9000-v-1-0-2-46hf-1-0-2-46hf-hw.42223/
https://www.snbforums.com/threads/custom-firmware-build-for-r9000-v-1-0-2-47hf-1-0-2-47hf-hw.42721/
hhttps://www.snbforums.com/threads/custom-firmware-build-for-r9000-v-1-0-2-54hf-1-0-2-54hf-hw-1-0-3-7hf-1-0-3-7hf-hw.43854/
https://www.snbforums.com/threads/custom-firmware-build-for-r9000-v-1-0-3-8hf-1-0-3-8hf-hw.44204/

New version of my custom firmware build: 1.0.3.11HF/1.0.3.11HF-HW.

Changes (vs 1.0.3.9HF):

1. Integration of changes from the stock v. 1.0.3.10.

PSV-2017-3170 http://kb.netgear.com/en_US/000055194/
PSV-2017-3167 http://kb.netgear.com/en_US/000055193/
PSV-2017-3093 http://kb.netgear.com/en_US/000055191/​

NOTE: reset is needed!
2. Some NG bugs are corrected.
3. OpenVPN client is optimized.
4. OpenSSL configuration is changed to provide compatibility with ReadyCLOUD 20170711.
5. OpenVPN is upgraded 2.4.4->2.4.5.
6. dropbear package is upgraded 2017.75->2018.76.
7. util-linux package is upgraded 2.30.2->2.31.1.
8. iperf package is upgraded to iperf3 2.0.10->3.4.
9. Beta support of R8900.

The link is:

https://www.voxel-firmware.com (thanks to vladlenas for his help with hosting).

Important: reset to factory settings is needed after flasing.

Difference 1.0.3.11HF-HW vs 1.0.3.11HF: “HW” version means hardware acceleration of OpenSSL.

P.S. It is recommended to disable Router Auto Firmware Update. Otherwise your router might be upgraded suddenly by stock version.

Voxel.

 

[Voxel]

Info for Entware users: it is upgraded. Now it is not Entware-NG/Entware-NG-3x, but just Entware:

https://www.snbforums.com/threads/e...swrt-merlin-firmware.44393/page-5#post-388971

So my version for Cortex-A15 is upgraded too. A lot of packages are upgraded, some packages are added, new compiler (GCC 7.3.0) is used, new GLIBC is used (2.26). It is suggested to re-install Entware from the scratch saving your own configs and restoring them after re-installation.

https://www.voxel-firmware.com/Downloads/Voxel/html/entware.html

Voxel.