GNP unable to change VLAN ID on LAN | VLAN | Profile tab - bug?

[kstamand]

While in “Wireless Router Mode” with a couple of VLAN defined (Guest Network Pro - GNP), I was able to click on a VLAN line and change VLAN ID, but not when the the router is running in AP mode.

It appears that only a portion of the popup window is showing and I'm unable to drag it down to see the rest of it. I get the same results in different browsers (safari, edge, chrome) on a Mac and Windows PC.

Is this normal behavior as shown in screenshot below or should there be more information that should be displayed like i see when running in Wireless Router Mode?
My goal is to change from the default 52, 53, 54, ... VLAN ID to something of my choosing (e.g., 11, 12, 13, ...)
GT-AX6000, running 3006.102.5

 

[kstamand]

FWIW - I installed the native Asus firmware for this router (GT-AX6000), reset to factory defaults, and the issue was resolved.

Upgrading to Merlin software and the problem returns, with both 102.5 and the 102.6 beta. @RMerlin, is this an Asus issue or is this possibly something that could be addressed in Asuswrt-Merlin code?

In the end, I prefer Merlin code and this is a minor issue I can live with.

 

[jksmurf]

FWIW - I installed the native Asus firmware for this router (GT-AX6000), reset to factory defaults, and the issue was resolved.

Upgrading to Merlin software and the problem returns, with both 102.5 and the 102.6 beta. @RMerlin, is this an Asus issue or is this possibly something that could be addressed in Asuswrt-Merlin code?

In the end, I prefer Merlin code and this is a minor issue I can live with.

Possible

 

[bennor]

While in “Wireless Router Mode” with a couple of VLAN defined (Guest Network Pro - GNP), I was able to click on a VLAN line and change VLAN ID, but not when the the router is running in AP mode.

It appears that only a portion of the popup window is showing and I'm unable to drag it down to see the rest of it. I get the same results in different browsers (safari, edge, chrome) on a Mac and Windows PC.

Is this normal behavior as shown in screenshot below or should there be more information that should be displayed like i see when running in Wireless Router Mode?
My goal is to change from the default 52, 53, 54, ... VLAN ID to something of my choosing (e.g., 11, 12, 13, ...)
GT-AX6000, running 3006.102.5

View attachment 68720

Not seeing that cut off issue on a RT-AX86U Pro running Asus-Merlin 3006.102.5. Tested on Windows 11 with Brave, and on Android with both Brave and Chrome.

 

[kstamand]

Thank you @jksmurf and @bennor, but I notice you are both running in Wireless and not AP mode. As I noted in my original post, I did not have the issue when running in wireless mode, but only in AP mode.

It did get me wondering if it's possibly a ROG only device issue?

 

[jksmurf]

Thank you @jksmurf and @bennor, but I notice you are both running in Wireless and not AP mode. As I noted in my original post, I did not have the issue when running in wireless mode, but only in AP mode.

It did get me wondering if it's possibly a ROG only device issue?

Interesting, apologies I did miss that truncated screen note!

I actually have a GT-AX6000 which I will put into commission in a few days time, but unfortunately I have carefully prepared it for Wireless Router Mode and not AP mode, so cannot test that theory for you. Maybe someone else with your config can check that one out, as you have tried different browsers already, so ruled that out.

 

[bennor]

Thank you @jksmurf and @bennor, but I notice you are both running in Wireless and not AP mode.

Apologies, didn't realize you were talking about AP Mode. Reconfigured a RT-AX86U Pro running 3006.102.5 to AP Mode and do indeed see the same on Windows 11 Home with Brave browser. The dialog box is positioned higher than it should be cutting off the top of the dialog box. Image and Brave browser console attached. Issue also happens in Firefox and Edge.