How to make VPN exception on VOXEL fw

[Lord_Vader]

Hi all! Need some of your precious help...
I would like to add exceptions for my VPN on Voxel firmware, and specify VPN-exceptions via ip-addresses.

I'm a total newbie on Linux but I'm able to browse to /etc/openvpn/ via my Mac and Telnet.

But how the heck do I change the ovpnclient-up.sh with these lines below (from Kamoj)


NO_VPN_LST="192.168.1.8 192.168.1.11 192.168.1.12"
NOVPN_TABLE="200"
WAN_GWAY=`ip route | awk '/^default/{print $3}'`
while [ $(ip route list table $NOVPN_TABLE default | grep "default" | wc -l) != "0" ]; do ip route del table $NOVPN_TABLE default 2>/dev/null; done
while [ $(ip route list table $NOVPN_TABLE | grep "default" | wc -l) != "0" ]; do ip route del table $NOVPN_TABLE 2>/dev/null; done
while [ $(ip rule list | grep "lookup $NOVPN_TABLE" | wc -l) != "0" ]; do ip rule del table $NOVPN_TABLE 2>/dev/null; done
ip route flush cache
sleep 1
for excludeip in $NO_VPN_LST; do [ $(ip rule list | grep "${excludeip} lookup $NOVPN_TABLE" | wc -l) = "0" ] && ip rule add from ${excludeip} table $NOVPN_TABLE; done
ip route add default via $WAN_GWAY dev `ip route | awk '/^default/{print $NF}'` table $NOVPN_TABLE
ip route flush cache

 

[eevanskiteboards]

I think you have to use this command to access and change that file.

vim /etc/openvpn/ovpnclient-up.sh


vim is the built in text editor.

https://coderwall.com/p/adv71w/basic-vim-commands-for-getting-started

 

[Lord_Vader]

Well, then it look like this:
=== IMPORTANT ============================



#!/bin/sh



/sbin/ledcontrol -n wan -c green -s on

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

~

I /etc/openvpn/ovpnclient-up.sh [modified] 1/4 25%

 

[eevanskiteboards]

I think you copy/paste the code and save the file. Disclaimer, I'm still learning this stuff myself as well.

 

[kamoj]

Bypassing the OpenVPN client tunnel using the Kamoj add-on:
https://www.snbforums.com/threads/k...7800-x4s-and-r9000-x10-temperatures-a-o.55063