How to use args: in openvpn-event?

[octopus]

I trigger script from "openvpn-event" but i need that only trigger when tun12 get connected again or vpn turned off/on.
Now its triggered with all tun11-15. How to accomplish that?

openvpn-event user script that gets run when a tunnel goes up/down

custom script: Running /jffs/scripts/openvpn-event (args: tun12 1500 1558 10.xxx.0.7 )

thanks
octopus

 

[Martineau]

I trigger script from "openvpn-event" but i need that only trigger when tun12 get connected again or vpn turned off/on.
Now its triggered with all tun11-15. How to accomplish that?

openvpn-event user script that gets run when a tunnel goes up/down


thanks
octopus

OpenVPN environment variables should be exposed to your openvpn-event script:

$dev

should contain the 'tun??' string.

 

[octopus]

Thanks for answer
Yes it's tun. I have tried in openvpn-event script:

if [ "$dev" == "tun 12" ]; then

but have not that working.

octopus

 

[ryzhov_al]

On my side/jffs/scripts/openvpn-event is called only when I start/stop OpenVPN client from WebU. It's never called automatically when VPN connection terminated or restored.

Also, I don't know why there is no args when it's coming up:

# tail -f /tmp/syslog.log | grep 'custom script'
Jan 21 17:00:04 custom script: Running /jffs/scripts/openvpn-event (args: )

When it goes down (manually!), args seems OK:

# tail -f /tmp/syslog.log | grep 'custom script'
Jan 21 16:59:36 custom script: Running /jffs/scripts/openvpn-event (args: tun11 1500 1542 10.8.0.6 10.8.0.5 init)

RT-N66U with the last asuswrt-merlin release.

 

[Martineau]

On my side/jffs/scripts/openvpn-event is called only when I start/stop OpenVPN client from WebU. It's never called automatically when VPN connection terminated or restored.

Also, I don't know why there is no args when it's coming up:

# tail -f /tmp/syslog.log | grep 'custom script'
Jan 21 17:00:04 custom script: Running /jffs/scripts/openvpn-event (args: )

When it goes down (manually!), args seems OK:

# tail -f /tmp/syslog.log | grep 'custom script'
Jan 21 16:59:36 custom script: Running /jffs/scripts/openvpn-event (args: tun11 1500 1542 10.8.0.6 10.8.0.5 init)

RT-N66U with the last asuswrt-merlin release.

Check the syslog in this post..and the arg patch by @john9527

http://www.snbforums.com/threads/clear-delete-vpn-profile-from-router.29899/#post-232902

 

[octopus]

That is working now

I need to write to nvram but not write every time, probably missed something, something suggestion?

echo "rc='$curlvpn'" | nvram set ip_vpn=$curlvpn

thanks
octopus

 

[Paxsat]

#!/bin/sh
if [ "$1" == "tun11" -a "$6" == "init" ]
 then
   logger "VPN disattiva Fermo Transmission.."
   /opt/etc/init.d/S88transmission stop
fi

if [ "$1" == "tun11" -a "$6" == "" ]
  then
    logger "VPN attiva avvio Transmission"
    /opt/etc/init.d/S88transmission restart
fi