IPV6 RT-N66U with -40 Merlin F/W

[Gapmn]

I currently have the RT-N66U (Router Mode, handling the PPPoe and IPV6 connections) with the Merlin -40 F/W installed. I am looking to buy a second RT-N66U (install the -40 F/W) and run it in "Media Bridge Mode."

I will have 2 PC's hardwired to the RT-N66U in Media Bridge.

My only concern is that I need the Media Bridged RT-N66U to pass IPV6 through to my two PC's. Will that happen? If so, are there any special settings that have to be done to "either of the RT-N66U's ??

 

[Gapmn]

Okay...I wasted to much time on this issue. Best I can tell, repeaters and bridges have a difficult time at best of allowing IPV6 pass through. I decided to just get two USB-N13 adapters. They are cheap, fast, easy to use and work perfect with IPV6. Problem solved.

 

[BlackRoc]

This is the closest article I can find relating to the issue but I dont know if this is applicable for asus router.

http://blog.hqcodeshop.fi/archives/104-IPv6-through-WLAN-access-point-revisited.html

I'm also trying to see if ipv6 can be configured to work through a repeater, any help from the experts?

 

[Gapmn]

Thanks BlackRoc,

I wanted a method that was quick and easy (no programming involved). Thus, I plugged in the 2 USB-N13's, selected my wifi, and all is good (including my IPV6).