What's new
  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Is >80Mbps WiFi downlink really virtually impossible?

krzyq

New Around Here
Hi and hello all,

I was browsing the SNB charts and forums from the very morning in order to find a solution to my problem and it turned out that the solution may not exist, yet. So I decided to write on the forum in order to seek your advice.

I have upgraded my Internet connection lately to 80Mbps downlink. Everything works at 80Mbps (megabits per second) speed when I'm on cable. When I use modem's WiFi-N, I can only get ~60Mbps, when I'm the only one on the WiFi network. Ok, I thought - modem has a crappy WiFi and I need to search for either a router or an AP. There are plenty devices out there with throughput reaching hundreds of Mbps. So I thought. It seems that I was wrong, as I am unable to find in the charts a device that will let me fully experience my Internet connection speed.

Am I correctly interpreting the results in the charts? What's your experience in that matter and what would you generally suggest within $200 range - AP or router?

Thanks in advance,
Krzyq
 
Quick answer is that such speeds are only possible with strong signals and low competing traffic.

Longer answer is:

The default view of the charts shows the average of multiple test locations. Use the dropdown next to the benchmark selector to see individual location and max/min results.

Using http://www.smallnetbuilder.com/lanwan/router-charts/bar/58-2_4-ghz-dn?see=MAX you see only one product near your 80 Mbps requirement.

Switching to the 40 MHz bandwidth view
http://www.smallnetbuilder.com/lanwan/router-charts/bar/62-2_4-ghz-dn-40?see=MAX

you see more candidates.

However, if you check the individual locations, you will see that you get such high speeds only with very strong signals, i.e. same/next room.

Note that using 40 MHz bandwidth mode in 2.4 GHz isn't recommended because it uses almost the entire 2.4 GHz spectrum. 5 GHz is ok to use 40 MHz mode since there are more non-overlapping channels. But 5 GHz signals don't go as far.
 

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Back
Top