isp connection type with RFC2684 Bridged (dynamic)

[Jadblack]

Hello guys, i need help.
My ISP Fastweb in italy use this protocol (RFC 2684 Bridged ip and i can't find this modality in the wan page.
How can i set VPI 8 VCI 36.
Many thanks

 

[ColinTaylor]

How are we supposed to know as you haven't told us what router you have?

 

[Jadblack]

How are we supposed to know as you haven't told us what router you have?

sorry i have an asus rt ac68 u with the latest merlin and my isp does want this configuration:

• VPI/VCI: 8/36

• Protocollo: RFC 2684 bridged (dinamico)

• Incapsulamento: LLC

• DHCP client: abilitato

• DHCP server: abilitato

• NAT: abilitato

i don't find any rfc 2684 to enable

 

[ColinTaylor]

Protocollo: RFC 2684 bridged (dinamico)

That connection type is only used by modems AFAIK (e.g. ADSL). The RT-AC68U does not have a modem therefore it is not applicable. You need to enter those settings on your modem.

 

[Jadblack]

Tha

That connection type is only used by modems AFAIK (e.g. ADSL). The RT-AC68U does not have a modem therefore it is not applicable. You need to enter those settings on your modem.

Thanks actually there is a automatic procedure on isp site that explain how to get this working with the custom firmware... https://www.fastweb.it/myfastweb/assistenza/guide/asus-dsl-ac68u/

 

[ColinTaylor]

Thanks actually there is a automatic procedure on isp site that explain how to get this working with the custom firmware... https://www.fastweb.it/myfastweb/assistenza/guide/asus-dsl-ac68u/

That is for the DSL-AC68U which does have a modem, not the RT-AC68U which does not.

 

[Jadblack]

That is for the DSL-AC68U which does have a modem, not the RT-AC68U which does not.

Ok sorry for my mistake.
Nothing to do so
I really wanted to waste the isp modem
Thanks again