pktrunner error

[Cornel]

Could anyone please advise what's causing these errors

May 28 10:17:26 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,181: Could not rdpa_system_ipv4_host_address_table_add ret=-3^[[0m
May 28 10:17:27 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,181: Could not rdpa_system_ipv4_host_address_table_add ret=-3^[[0m

 

[Cornel]

Everything seems to be working normally, except that the system log is not logging anything else immediately after the reboot. Below it's where it stopped yesterday (current logging level is set to Notice), but I would normally see lots of logs about ovpn.

May 28 15:46:17 ovpn-server1[4079]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
May 28 15:46:17 ovpn-server2[4151]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
May 28 15:46:18 wsdd2[4042]: Terminated received.
May 28 15:46:18 ovpn-client1[4304]: WARNING: Compression for receiving enabled. Compression has been used in the past to break encryption. Sent packets are not compressed unless "allow-compression yes" is also set.
May 28 15:46:18 ovpn-client1[4305]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
May 28 15:46:19 crond[2434]: time disparity of 2663020 minutes detected
May 28 15:46:20 ovpn-client2[4392]: WARNING: Compression for receiving enabled. Compression has been used in the past to break encryption. Sent packets are not compressed unless "allow-compression yes" is also set.
May 28 15:46:20 ovpn-client2[4393]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
May 28 15:46:20 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,181: Could not rdpa_system_ipv4_host_address_table_add ret=-3^[[0m
May 28 15:46:21 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,181: Could not rdpa_system_ipv4_host_address_table_add ret=-3^[[0m
May 28 15:46:25 kernel: In wl_dfs_cac_notify_status chanspec 0xea32 DFS state 2
May 28 15:47:00 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,181: Could not rdpa_system_ipv4_host_address_table_add ret=-3^[[0m
May 28 15:47:01 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,181: Could not rdpa_system_ipv4_host_address_table_add ret=-3^[[0m
May 28 15:47:01 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,181: Could not rdpa_system_ipv4_host_address_table_add ret=-3^[[0m

 

[Swistheater]

Everything seems to be working normally, except that the system log is not logging anything else immediately after the reboot. Below it's where it stopped yesterday (current logging level is set to Notice), but I would normally see lots of logs about ovpn.

May 28 15:46:17 ovpn-server1[4079]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
May 28 15:46:17 ovpn-server2[4151]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
May 28 15:46:18 wsdd2[4042]: Terminated received.
May 28 15:46:18 ovpn-client1[4304]: WARNING: Compression for receiving enabled. Compression has been used in the past to break encryption. Sent packets are not compressed unless "allow-compression yes" is also set.
May 28 15:46:18 ovpn-client1[4305]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
May 28 15:46:19 crond[2434]: time disparity of 2663020 minutes detected
May 28 15:46:20 ovpn-client2[4392]: WARNING: Compression for receiving enabled. Compression has been used in the past to break encryption. Sent packets are not compressed unless "allow-compression yes" is also set.
May 28 15:46:20 ovpn-client2[4393]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
May 28 15:46:20 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,181: Could not rdpa_system_ipv4_host_address_table_add ret=-3^[[0m
May 28 15:46:21 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,181: Could not rdpa_system_ipv4_host_address_table_add ret=-3^[[0m
May 28 15:46:25 kernel: In wl_dfs_cac_notify_status chanspec 0xea32 DFS state 2
May 28 15:47:00 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,181: Could not rdpa_system_ipv4_host_address_table_add ret=-3^[[0m
May 28 15:47:01 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,181: Could not rdpa_system_ipv4_host_address_table_add ret=-3^[[0m
May 28 15:47:01 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,181: Could not rdpa_system_ipv4_host_address_table_add ret=-3^[[0m

are you actually running VPN services?

 

[Cornel]

I am running OpenVPN/WG servers and clients

 

[HarryMuscle]

Did you ever get this figured out? I'm just setting up multiple WG clients and I'm getting this error in my logs and some of my WG clients aren't connecting (even though the Status page says they are).

Thanks,
Harry

 

[Cornel]

I do get the same error as in my first post and the one below occasionally

Oct 17 04:41:17 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,190: Could not rdpa_system_ipv4_host_address_table_find ret=-5^[[0m

I'm not sure how/if this is related to WG or VPN services at all. The only references I was able to find seem to point to rdpa, and hoped someone here would be able to shed more light on it.

 

[HarryMuscle]

I do get the same error as in my first post and the one below occasionally

Oct 17 04:41:17 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inetaddr_event,190: Could not rdpa_system_ipv4_host_address_table_find ret=-5^[[0m

I'm not sure how/if this is related to WG or VPN services at all. The only references I was able to find seem to point to rdpa, and hoped someone here would be able to shed more light on it.

What router and firmware version are you running?

 

[Cornel]

I have two RT-AX86U PRO (one of them I access remotely via VPN), both on Merlin 3004.388.4 and I can see these errors on both of them

 

[kernol]

pktrunner not @RMerlin problem - closed source and beyond his control .

Nevertheless - it does NOT seem to impact on service reliability for any of my clients.
I use OpenVPN server and OpenVPN clients with NordVPN configs on the router - but not Wireguard.

pktrunner error pops up regularly in the logs - like a LOT of other stuff best ignored .