Problem with VPN Director

[L&LD]

Show screenshots.

You're doing something wrong.

 

[Asusrouterlover]

I would like to report an issue with the network planning of the Virtual Private Network (VPN Director) when a rule was added to individual IP address 192.168.77.30/24 to connect to the VPN network. This has resulted in redirecting the entire subnet's routing 92.168.77.0/24 to connect to the VPN.

can some one help

Asuswrt-Merlin
Firmware:3004.388.6

 

[L&LD]

Please do not cross-post the same topic all over the forums.

Release - Asuswrt-Merlin 3004.388.6 is now available

After several years running pretty stable it's the second event of router "freezing" (not replying to pings / web unresponsive neither ssh). The logs presented several entries like this one kernel: FPM Pool 1:nvalid token 0x2db20000 freed After it kernel: FPM Pool 0: pool full Its a...

www.snbforums.com

Makes it hard to have a concise conversation when there are multiple posts/replies.

 

[ColinTaylor]

I would like to report an issue with the network planning of the Virtual Private Network (VPN Director) when a rule was added to individual IP address 192.168.77.30/24 to connect to the VPN network. This has resulted in redirecting the entire subnet's routing 92.168.77.0/24 to connect to the VPN.

can some one help

Asuswrt-Merlin
Firmware:3004.388.6

That is because you are specifying the entire subnet, 192.168.77.30/24. The /24 part means the subnet mask is 255.255.255.0. If you want to only specify one address use just the IP address, 192.168.77.30.

IP Calculator / IP Subnetting

jodies.de

 

[Asusrouterlover]

That is because you are specifying the entire subnet, 192.168.77.30/24. The /24 part means the subnet mask is 255.255.255.0. If you want to only specify one address use just the IP address, 192.168.77.30.

IP Calculator / IP Subnetting

jodies.de

I will configure this address with the format 192.168.77.30/32. let me know if this config is wrong

 

[ColinTaylor]

I will configure this address with the format 192.168.77.30/32. let me know if this config is wrong

Use can use /32 if you want to. That's the same as not specifying it at all.

 

[ZebMcKayhan]

i like to report NAT Problem with VPN Director when i add rule to Nat Single IP 192.168.77.30/24 to vpn concoction the whole subnet 92.168.77.0/24 redirected to vpn connection

How is this a problem?
https://en.m.wikipedia.org/wiki/Classless_Inter-Domain_Routing

Using cidr blocks as used by routing, by /24 you imply that 24 most significant bits, basically nullifies your .30 as it will be masked away.

If you want to specify any single ip, use /32 or usually leave ip without cidr notation.