What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

RTRMON RTRMON v2.2.3 -Nov 16, 2025- Monitor your Router's Health (New: Wireguard, AMTM, Network Conn/Bandwidth/Diag + Port Scanner + Speedtest) - v2.2.4Beta2

Viktor Jaep said:
Here's an example of everything you can see about a wireless client... do you mean the "chanspec 48/80 (0xe32a)" or the "link bandwidth = 80 MHZ" perhaps?

Code: 
ViktorJp@GT-AX6000-3C88:/tmp/home/root# wl -i eth7 sta_info 04:27:28:3B:3C:22
[VER 8] STA 04:27:28:3B:3C:22:
         chanspec 48/80 (0xe32a)
         aid:11
         rateset [ 6 9 12 18 24 36 48 54 ]
         idle 9 seconds
         in network 35152 seconds
         state: AUTHENTICATED ASSOCIATED AUTHORIZED
         connection: SECURED
         auth: WPA2-PSK
         crypto: AES_CCM
         flags 0x11e13a: WME PS N_CAP VHT_CAP AMPDU AMSDU
         HT caps 0x1ef: LDPC 40MHz SGI20 SGI40 STBC-Tx STBC-Rx
         VHT caps 0x1b: LDPC SGI80 STBC-Tx STBC-Rx
         tx total pkts: 812763
         tx total bytes: 797076586
         tx ucast pkts: 798847
         tx ucast bytes: 794509579
         tx mcast/bcast pkts: 13916
         tx mcast/bcast bytes: 2567007
         tx failures: 166
         rx data pkts: 354487
         rx data bytes: 77557209
         rx data dur: 0
         rx ucast pkts: 353014
         rx ucast bytes: 77259826
         rx mcast/bcast pkts: 1473
         rx mcast/bcast bytes: 297383
         rate of last tx pkt: 866667 kbps - 468000 kbps
         rate of last rx pkt: 6000 kbps
         rx decrypt succeeds: 350681
         rx decrypt failures: 0
         tx data pkts retried: 50
         per antenna rssi of last rx data frame: -61 -57 -68 -67
         per antenna average rssi of rx data frames: -62 -57 -68 -67
         per antenna noise floor: -90 -91 -89 -91
         tx total pkts sent: 800644
         tx pkts retries: 51706
         tx pkts retry exhausted: 166
         tx FW total pkts sent: 0
         tx FW pkts retries: 0
         tx FW pkts retry exhausted: 0
         rx total pkts retried: 1650
MCS SET : [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
VHT SET : 0x1 1x1 2x1 3x1 4x1 5x1 6x1 7x1 8x1 9x1
        : 0x2 1x2 2x2 3x2 4x2 5x2 6x2 7x2 8x2 9x2
smoothed rssi: -57
tx nrate
vht mcs 9 Nss 2 Tx Exp 0 bw80 ldpc sgi auto
rx nrate
legacy rate 6 Mbps stf mode 0 auto
wnm
0x0:
VENDOR OUI VALUE[0] 00:0C:43
VENDOR OUI VALUE[1] 00:50:F2
link bandwidth = 80 MHZ
RRM capability = 0x0
Frequency Bands Supported: 5G
Click to expand...
"chanspec 48/80" is probably most appropriate as it shows connected channel (indicating 2.4, 5, 6-1, or 6-2 GHz as band) plus bandwidth of the connection. Not sure what the "(0xe32a)" portion means.
 
Last edited:
visortgw said:
"chanspec 48/80" is probably most appropriate as it shows connected channel (indicating 2.4, 5, 6-1, or 6-2 GHz as band) plus bandwidth of the connection. Not sure what the "(0xe32a)" portion means.
Click to expand...
Easy peasy lemon squeezy:
Code: 
curl --retry 3 "https://raw.githubusercontent.com/ViktorJp/RTRMON/develop/rtrmon.sh" -o "/jffs/scripts/rtrmon.sh" && chmod 755 "/jffs/scripts/rtrmon.sh"

;)

1765029039455.png
 
Viktor Jaep said:
Easy peasy lemon squeezy:
Code: 
curl --retry 3 "https://raw.githubusercontent.com/ViktorJp/RTRMON/develop/rtrmon.sh" -o "/jffs/scripts/rtrmon.sh" && chmod 755 "/jffs/scripts/rtrmon.sh"

;)

View attachment 69401
Click to expand...
This only reports channel (no bandwidth) and only for first interface — I only included first two interfaces:
Code: 
  RTRMON - v2.2.4b2               (S)how/(H)ide Operations Menu            Sat Dec 06, 2025 08:58:34 EST -0500

  Attached Wireless + Wired Clients                                                                         
 
  Sort By:  (!)Name   |  (@)IP  |  (#)MAC
 --------------------------------------------------------------------------------------------------------------

  Local 2.4GHz               [                    Enabled                                     ] IFace: wl3 
  Name          | IP              | MAC               | Uptime  | TX GB | RX GB | TX Mbps | RX Mbps | Sig | Band
  bq16proGarage | 192.168.222.252 | 60:CF:84:XX:XX:XX | 16h:51m | 0.56  | 0.01  | 516.2   | 387.1   | -45 | 6

  Local Wi-Fi: TheS1R                           [ Enabled                                     ] IFace: wl0.1 
  Name       | IP              | MAC               | Uptime  | TX GB | RX GB | TX Mbps | RX Mbps | Sig
  djw-iPad   | 192.168.222.049 | 6C:4A:85:XX:XX:XX | 00h:30m | 0.00  | 0.00  | 960.7   | 51.6    | -79
  S1RsZFlip7 | 192.168.222.015 | 68:DF:E4:XX:XX:XX | 00h:44m | 0.00  | 0.00  | 1633.3  | 6.0     | -71
 
Last edited:
visortgw said:
This only reports channel (no bandwidth) and only for first interface — I inly included first two interfaces:
Code: 
  RTRMON - v2.2.4b2               (S)how/(H)ide Operations Menu            Sat Dec 06, 2025 08:58:34 EST -0500

  Attached Wireless + Wired Clients                                                                        
 
  Sort By:  (!)Name   |  (@)IP  |  (#)MAC
 --------------------------------------------------------------------------------------------------------------

  Local 2.4GHz               [                    Enabled                                     ] IFace: wl3
  Name          | IP              | MAC               | Uptime  | TX GB | RX GB | TX Mbps | RX Mbps | Sig | Band
  bq16proGarage | 192.168.222.252 | 60:CF:84:XX:XX:XX | 16h:51m | 0.56  | 0.01  | 516.2   | 387.1   | -45 | 6

  Local Wi-Fi: TheS1R                           [ Enabled                                     ] IFace: wl0.1
  Name       | IP              | MAC               | Uptime  | TX GB | RX GB | TX Mbps | RX Mbps | Sig
  djw-iPad   | 192.168.222.049 | 6C:4A:85:XX:XX:XX | 00h:30m | 0.00  | 0.00  | 960.7   | 51.6    | -79
  S1RsZFlip7 | 192.168.222.015 | 68:DF:E4:XX:XX:XX | 00h:44m | 0.00  | 0.00  | 1633.3  | 6.0     | -71
Click to expand...
Sorry about that... I've enabled it for the other interfaces as well now. Please download the same from above. So as it turns out, 2.4Ghz only gives you a channel.

Code: 
ViktorJp@GT-AX6000-3C88:/tmp/home/root# wl -i eth6 sta_info E6:F6:81:B6:BA:C4
[VER 8] STA E6:F6:81:B6:BA:C4:
         chanspec 5 (0x1005)
         aid:12
         rateset [ 1 2 5.5 6 9 11 12 18 24 36 48 54 ]
         idle 4 seconds
         in network 456 seconds
         state: AUTHENTICATED ASSOCIATED AUTHORIZED
         connection: SECURED
         auth: WPA2-PSK
         crypto: AES_CCM
         flags 0xd1e13b: BRCM WME PS N_CAP VHT_CAP HE_CAP AMPDU AMSDU GBL_RCLASS
         HT caps 0x2d: LDPC  SGI20
         VHT caps 0x143: LDPC SGI80 SU-BFE MU-BFE
         HE caps 0xb629: LDPC HE-HTC SU&MU-BFE
         OMI 0x0041: 20Mhz rx=2ss tx=2ss
         tx total pkts: 12239
         tx total bytes: 23912101
         tx ucast pkts: 9596
         tx ucast bytes: 23715041
         tx mcast/bcast pkts: 2643
         tx mcast/bcast bytes: 197060
         tx failures: 0
         rx data pkts: 6338
         rx data bytes: 845262
         rx data dur: 0
         rx ucast pkts: 6274
         rx ucast bytes: 828782
         rx mcast/bcast pkts: 64
         rx mcast/bcast bytes: 16480
         rate of last tx pkt: 270830 kbps - 162500 kbps
         rate of last rx pkt: 24000 kbps
         rx decrypt succeeds: 2289
         rx decrypt failures: 0
         tx data pkts retried: 4
         per antenna rssi of last rx data frame: -61 -61 -58 -50
         per antenna average rssi of rx data frames: -60 -60 -58 -51
         per antenna noise floor: -82 -88 -88 -86
         tx total pkts sent: 9607
         tx pkts retries: 2617
         tx pkts retry exhausted: 0
         tx FW total pkts sent: 0
         tx FW pkts retries: 0
         tx FW pkts retry exhausted: 0
         rx total pkts retried: 627
MCS SET : [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
VHT SET : 0x1 1x1 2x1 3x1 4x1 5x1 6x1 7x1 8x1 9x1
        : 0x2 1x2 2x2 3x2 4x2 5x2 6x2 7x2 8x2 9x2
HE SET  :
            20/40/80 MHz:
                NSS1 Tx: 0-11        Rx: 0-11
                NSS2 Tx: 0-11        Rx: 0-11
smoothed rssi: -51
tx nrate
he mcs 11 Nss 2 Tx Exp 2 bw20 ldpc 2xLTF GI 1.6us auto
rx nrate
legacy rate 24 Mbps stf mode 0 auto
wnm
0x1:  BSS-Transition
VENDOR OUI VALUE[0] 00:90:4C
VENDOR OUI VALUE[1] 00:10:18
VENDOR OUI VALUE[2] 00:50:F2
link bandwidth = 20 MHZ
RRM capability = 0x10873  Link_Measurement Neighbor_Report Beacon_Passive Beacon_Active Beacon_Table Statistics_Measurement AP_Channel_Report
Frequency Bands Supported: 2.4G 5G 6G
 
Viktor Jaep said:
Sorry about that... I've enabled it for the other interfaces as well now. Please download the same from above. So as it turns out, 2.4Ghz only gives you a channel.

Code: 
ViktorJp@GT-AX6000-3C88:/tmp/home/root# wl -i eth6 sta_info E6:F6:81:B6:BA:C4
[VER 8] STA E6:F6:81:B6:BA:C4:
         chanspec 5 (0x1005)
         aid:12
         rateset [ 1 2 5.5 6 9 11 12 18 24 36 48 54 ]
         idle 4 seconds
         in network 456 seconds
         state: AUTHENTICATED ASSOCIATED AUTHORIZED
         connection: SECURED
         auth: WPA2-PSK
         crypto: AES_CCM
         flags 0xd1e13b: BRCM WME PS N_CAP VHT_CAP HE_CAP AMPDU AMSDU GBL_RCLASS
         HT caps 0x2d: LDPC  SGI20
         VHT caps 0x143: LDPC SGI80 SU-BFE MU-BFE
         HE caps 0xb629: LDPC HE-HTC SU&MU-BFE
         OMI 0x0041: 20Mhz rx=2ss tx=2ss
         tx total pkts: 12239
         tx total bytes: 23912101
         tx ucast pkts: 9596
         tx ucast bytes: 23715041
         tx mcast/bcast pkts: 2643
         tx mcast/bcast bytes: 197060
         tx failures: 0
         rx data pkts: 6338
         rx data bytes: 845262
         rx data dur: 0
         rx ucast pkts: 6274
         rx ucast bytes: 828782
         rx mcast/bcast pkts: 64
         rx mcast/bcast bytes: 16480
         rate of last tx pkt: 270830 kbps - 162500 kbps
         rate of last rx pkt: 24000 kbps
         rx decrypt succeeds: 2289
         rx decrypt failures: 0
         tx data pkts retried: 4
         per antenna rssi of last rx data frame: -61 -61 -58 -50
         per antenna average rssi of rx data frames: -60 -60 -58 -51
         per antenna noise floor: -82 -88 -88 -86
         tx total pkts sent: 9607
         tx pkts retries: 2617
         tx pkts retry exhausted: 0
         tx FW total pkts sent: 0
         tx FW pkts retries: 0
         tx FW pkts retry exhausted: 0
         rx total pkts retried: 627
MCS SET : [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
VHT SET : 0x1 1x1 2x1 3x1 4x1 5x1 6x1 7x1 8x1 9x1
        : 0x2 1x2 2x2 3x2 4x2 5x2 6x2 7x2 8x2 9x2
HE SET  :
            20/40/80 MHz:
                NSS1 Tx: 0-11        Rx: 0-11
                NSS2 Tx: 0-11        Rx: 0-11
smoothed rssi: -51
tx nrate
he mcs 11 Nss 2 Tx Exp 2 bw20 ldpc 2xLTF GI 1.6us auto
rx nrate
legacy rate 24 Mbps stf mode 0 auto
wnm
0x1:  BSS-Transition
VENDOR OUI VALUE[0] 00:90:4C
VENDOR OUI VALUE[1] 00:10:18
VENDOR OUI VALUE[2] 00:50:F2
link bandwidth = 20 MHZ
RRM capability = 0x10873  Link_Measurement Neighbor_Report Beacon_Passive Beacon_Active Beacon_Table Statistics_Measurement AP_Channel_Report
Frequency Bands Supported: 2.4G 5G 6G
Click to expand...
I PMed you full table with additional comments.
 
You must log in or register to reply here.

Similar threads

Viktor Jaep
RTRMON RTRMON v1.6.9 -May 3, 2024- Monitor your Router's Health (New: AMTM, Network Conn/Bandwidth/Diag + Port Scanner + Speedtest) [NEW THREAD OPENED]
23 24 25
Replies
499
Views
114K
visortgw
visortgw
Similar threads
Thread starter Title Forum Replies Date
M Unbound Unbound Stats for Asuswrt-Merlin v1.4.4 [2025-Nov-03] Generate Stats for Unbound Asuswrt-Merlin AddOns 8
Viktor Jaep VPNMON VPNMON-R3 v1.8.2 -Nov 23, 2025- Monitor OpenVPN/Wireguard WAN/Dual-WAN Health & Random Reset Multiple Connections (Available in AMTM!) - v1.8.3Beta1 Asuswrt-Merlin AddOns 188
M vnStat vnStat-on-Merlin v2.0.11 [2025-Nov-16] - Data Usage and Data Limit Monitoring using vnStat Asuswrt-Merlin AddOns 7
M uiScribe uiScribe v1.4.9 [2025-Nov-07] - Custom System Log WebUI page for Scribe (syslog-ng) logs Asuswrt-Merlin AddOns 5
M Scribe Scribe v3.2.5 [2025-Nov-23] - Entware syslog-ng and logrotate installer for Asuswrt-Merlin Asuswrt-Merlin AddOns 127
M connmon connmon v3.0.9 [2025-Nov-27] - Internet Connection Monitoring Tool for AsusWRT Merlin Asuswrt-Merlin AddOns 41
M ntpMerlin ntpMerlin v3.4.12 [2025-Nov-16] - NTP Time Server for AsusWRT Merlin Asuswrt-Merlin AddOns 38
M spdMerlin spdMerlin v4.4.16 [2025-Nov-16] - Internet Speedtest and Monitoring Tool for AsusWRT Merlin Asuswrt-Merlin AddOns 170
M YazFi YazFi v4.4.9 [2025-Nov-08] - Enhanced AsusWRT-Merlin Guest WiFi Networks Asuswrt-Merlin AddOns 20
M YazDHCP YazDHCP v1.2.4 [2025-Nov-21] - Feature expansion of DHCP assignments (increasing limit on the number of DHCP reservations) Asuswrt-Merlin AddOns 200

Similar threads

Latest threads

Support SNBForums w/ Amazon

If you'd like to support SNBForums, just use this link and buy anything on Amazon. Thanks!

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!

Members online

Total: 3,142 (members: 25, guests: 3,117)
Back
Top
✖