Some images not showing in Feedly

[Hammerhand]

Hello. I have a RT-AC68u with firmware Merlin 380.68.

I have configured nothing but my isp config.

If I enter feedly.com to see my feeds, some images doesn't show (not related to wich feed, some shows and some not).

I have read here: https://www.snbforums.com/threads/pictures-not-showing.40051/ that it may be a problem with DNS, so I tried to change it to 208.67.220.220/208.67.222.222 and 8.8.8.8/8.8.4.4. It was not of help.

Can you help me any way?

 

[thelonelycoder]

Some content is location based, try using your ISP's DNS and see if they load.

 

[AndreiV]

Hello. I have a RT-AC68u with firmware Merlin 380.68.

I have configured nothing but my isp config.

If I enter feedly.com to see my feeds, some images doesn't show (not related to wich feed, some shows and some not).

I have read here: https://www.snbforums.com/threads/pictures-not-showing.40051/ that it may be a problem with DNS, so I tried to change it to 208.67.220.220/208.67.222.222 and 8.8.8.8/8.8.4.4. It was not of help.

Can you help me any way?

Before you go changing settings and driving yourself barmey , I would wait to see if it isn't a problem with feedly.com. Sites often have issues with their servers that'll get fixed later in the day.

I use VK.com and many times a month you'll find images on some pages don't load due to the server the images reside on being offline/broken .

 

[Hammerhand]

Some content is location based, try using your ISP's DNS and see if they load.

Just to be sure: should I change them in lan/dhcp server or in wan/internet connection¿

My isp have some kind of issue that, if sees a mac disconnecting too much or too much time disconnected, bans you, so you have to call them to reset the connection and then it works again. Besides, they only help you if you use their provided router, so I don't want to mess too much, because I would have to change router, call them, wait about 20-30 minutes for them to realiza that they have to reset the connection and so on.

Before you go changing settings and driving yourself barmey , I would wait to see if it isn't a problem with feedly.com. Sites often have issues with their servers that'll get fixed later in the day.

I use VK.com and many times a month you'll find images on some pages don't load due to the server the images reside on being offline/broken .

I have talked to feedly premium support and they are on it, but as it only happens me with this router (bought a few days ago) I am pretty sure is some kind of configuration (or issue). For example, ports lan3 & lan4 didn't work as lan ports, so I had to connect via putty and change it. I guess is something like this.

 

[AndreiV]

It's easy enough to check. Got to one of the failed images, right click and save the link address for the image.

Use a web proxy like HideMy butt , drop the link in the box and hit enter, if it works you know it's your router, if not it is Feedly.

 

[thelonelycoder]

Just to be sure: should I change them in lan/dhcp server or in wan/internet connection¿

Unless you know what your are doing: ALWAYS leave these two blanc: DNS Server 1 and DNS Server 2
They are for another purpose.
Use WAN Connect to DNS Server automatically to set upstream DNS servers.
If you set Connect to DNS Server automatically to Yes then your ISP DNS is used.

 

[Hammerhand]

It's easy enough to check. Got to one of the failed images, right click and save the link address for the image.

Use a web proxy like HideMy butt , drop the link in the box and hit enter, if it works you know it's your router, if not it is Feedly.

Unfortunately, in feedly, if I right click any image, the "save link" option doesn't appear. If I use "inspect", I get something like "visual-overlay".

Anyway, if I follow the link to the original page, the images are shown properly. The problem is only inside feedly, but only with this router.

Unless you know what your are doing: ALWAYS leave these two blanc: DNS Server 1 and DNS Server 2
They are for another purpose.
Use WAN Connect to DNS Server automatically to set upstream DNS servers.
If you set Connect to DNS Server automatically to Yes then your ISP DNS is used.

Ok. Done. In this option I tried to use "yes". Doesn't work.

 

[Hammerhand]

Feedly assures that it's not on their side. Any other help?