tmo1900 to ac68u w/ merlin 376.47 fine but wont go to 378.56

[BaconScout]

First off thanks to everyone in their ongoing efforts to create / support open routers.
I haven't had to bad of a time updating my TMO1900 but now im stuck and wondering if i should just stay at merlin 376.

Trying to get to merlin 378 I used the firmware upload tool in the admin console and it just wont take.

Looks like its uploading and then pops out to the index page.

I tried clearning nvram, restarting with the reset button and it wont stick.

what am i doing wrong.

more info:
bl version is 1.0.2.0

and i used mtd-erase2 nvram after hard reset still no workie.

thank you
Bacon Scout

 

[Deleted member 22229]

When i had this issue i just flashed an older Merlin build 378.53 then flashed the new build 378.56_2 and all was good not sure why this has become a problem but a lot of people are having the issue. Some just recommend unhooking any usb devices and rebooting but that did not work for me. The above advise did work every time.

 

[BaconScout]

Fixed. Thank you

When i had this issue i just flashed an older Merlin build 378.53 then flashed the new build 378.56_2 and all was good not sure why this has become a problem but a lot of people are having the issue. Some just recommend unhooking any usb devices and rebooting but that did not work for me. The above advise did work every time.