TrafficMonitor daily , No info at all AC86U v384.5

[Sven Åke Carlsson]

History location = ram (default)

as you in image i get NO data
What is I missing?

edit wrong image

 

[ColinTaylor]

History location = ram (default)

You need to store the traffic data on a USB drive or in NVRAM for daily/monthly reports.

 

[Sven Åke Carlsson]

You need to store the traffic data on a USB drive or in NVRAM for daily/monthly reports.

I changed to NVRAM and rebooted
after that I surfed on some page and looked on traffic data again
but still no info
Do I need to wait until tomorrow?
Sven Åke

 

[ColinTaylor]

Do I need to wait until tomorrow?

Maybe, I'm not sure. What is the "Save frequency:" set to?

 

[AndreiV]

You need to store the traffic data on a USB drive or in NVRAM for daily/monthly reports.

Does that apply to all models ? I use the default ram setting and my Ac3200 shows daily reports.

 

[ColinTaylor]

Does that apply to all models ? I use the default ram setting and my Ac3200 shows daily reports.

Well you'll loose the historical data when you reboot the router. Remember also this is the Traffic Monitor not the Traffic Analyser.

 

[Sven Åke Carlsson]

I have in meantime tested to a USB memory
I can see it create \tomato_rstats_b06ebf634d18.gz but it's not changing size 2.06kb in 2,5 hour (I have "Save frequency" 1 hour")
and it's shoving no data

I have now since yesterday had i on NVRAM and this morning still no data
Sven Åke

 

[unsynaps]

Did you check off:
Create or reset data files:
Enable if using a new location
?

 

[Sven Åke Carlsson]

Did you check off:
Create or reset data files:
Enable if using a new location
?

As I wrote above YES

[QUOTE="I can see it create \tomato_rstats_b06ebf634d18.gz but it's not changing size 2.06kb in 2,5 hour (I have "Save frequency" 1 hour")?[/QUOTE]
I have followed "Global traffic monitoring" in this link
https://github.com/RMerl/asuswrt-merlin/wiki/Enhanced-Traffic-monitoring
but i did not find "disable NAT acceleration" But that Was not needed for now
can I check after anything in log-files?
Sven Åke

 

[Keenan]

Just so I understand, the Traffic History save location is saving the data displayed in the Traffic Monitor screen while what's saved on the Statistics tab/screen is in NVRAM?

 

[Sven Åke Carlsson]

I have now a new USB stick formate as NTFS
in tool's other setting
- every 1 hour
-I have selected /mnt/USB_8GB/AC_86log/
-Create reset data file YES
and then Apply
and I can see that file is created in 1 of Image
but as you see size is still 40bytes
and still NO DATA
have anyone any more ides ?
any log files to check?

Sven Åke

 

[ColinTaylor]

Is your AC86U in "router mode"?

Do you get your internet feed through the router's WAN port? I see your profile says you have a 4G dongle.

 

[Sven Åke Carlsson]

NO WAN connected
Dual WAN and Failover select
E3372 4G
I have no problem to connect to WAN

Sven Åke
edit: spelling

 

[ColinTaylor]

NO WAN connected

I suspect that is the problem. I think the Traffic Monitor only collects data passing through the primary WAN interface.

 

[Sven Åke Carlsson]

I suspect that is the problem. I think the Traffic Monitor only collects data passing through the primary WAN interface.

But isn't both WAN ?
dual WAN is from auto setup for 4G E3372

Sven Åke

 

[ColinTaylor]

But isn't both WAN ?
dual WAN is from auto setup for 4G E3372e

The Traffic Monitor code wasn't written by Asus so I suspect it doesn't understand dual-WAN configurations.

Is your E3372e the only internet source you have? If so, why are you using a dual-WAN with failover configuration?

 

[Sven Åke Carlsson]

If so, why are you using a dual-WAN with failover configuration?

as I say above ="dual WAN is from auto setup for 4G E3372
so failover came same time
I will test and remove it and see whats happens
Sven Åke
edit some move of text from

 

[Sven Åke Carlsson]

If so, why are you using a dual-WAN with failover configuration?

After I removed dual WAN and fail over and restarted
as you suggested
it's now working
short story
E3372 is a Hi-link USB modem that Asus had a lot of problem
my old N66U could not found it at all
it did not find it with shiped firmware on AC86U, as soon as I updated to newest Asus firmware It was OK
Merlin 384.5 was OK 1st time !
THANKS
Sven Åke

 

[Sven Åke Carlsson]

If I change to monthly it is
NO DATA IN TABLE
do I need to do something more to get monthly to work?

Sven Åke