Wireless Report for AIMesh v1.2.5 - [Mar-28-2026]

[visortgw]

View attachment 70879


v1.2.0-added nicknames on script install.

How does one configure nicknames? I don't see anything when running the installation script.

 

[JB_1366]

How does one configure nicknames? I don't see anything when running the installation script.

rerun script from curl, as install program was updated, option#4

 

[scootertramp]

Just because I am basically lazy. I added a couple of bits beyond the alias recommended to make life easier.

[CODE}
alias wrin="sh /jffs/addons/wireless_report/wr_install.sh"
cpwrin () { if [ ! -f /jffs/addons/wireless_report/wr_install.sh ]; then cp /tmp/wr_install.sh /jffs/addons/wireless_report/; fi }
inwrp () { curl -s -L https://raw.githubusercontent.com/JB1366/Wireless_Report/main/wr_install.sh -o /tmp/wr_install.sh && chmod +x /tmp/wr_install.sh && sh /tmp/wr_install.sh; }
[/CODE]

 

[jksmurf]

v1.2.0-added nickname option on script install.

Awesome stuff, thanks for taking this on board

 

[jksmurf]

rerun script from curl, as install program was updated, option#4

Will this also repopulate the install file from tmp to the wireless report dir i.e.

cp /tmp/wr_install.sh /jffs/addons/wireless_report

Or do we have to run that again?

 

[JB_1366]

Will this also repopulate the install file from tmp to the wireless report dir i.e.

cp /tmp/wr_install.sh /jffs/addons/wireless_report

Or do we have to run that again?

yes, rerun after curl install

 

[jksmurf]

Just because I am basically lazy. I added a couple of bits beyond the alias recommended to make life easier.

I’m not a programmer by any stretch of the imagination (I’m sure you’ll fix the curly bracket) but surely the install program itself could do the curl fetch and if needed extra copy across the script as part of the install?

Maybe @JB_1366 could have a look at addding this?

 

[jksmurf]

v1.2.0-added nickname option on script install.

Not sure if it’s the brackets or a limitation on number of characters but I’m seeing a truncated name. I’m guessing characters, which makes sense. No biggie and not urgent but could you perhaps add (max. XY chars) to the install note for that function

RT-AX3000 (Kat’s Room) is 21 Chars incl. spaces. It gets truncated by 2 so it would seem you allow about 19 chars?
Yours are about 16 or 17 so I’m guessing a limit of about 18 or 19.

 

[JB_1366]

Not sure if it’s the brackets or a limitation on number of characters but I’m seeing a truncated name. I’m guessing characters, which makes sense. No biggie and not urgent but could you perhaps add (max. XY chars) to the install note for that function

RT-AX3000 (Kat’s Room) is 21 Chars incl. spaces. It gets truncated by 2 so it would seem you allow about 19 chars?
Yours are about 16 or 17 so I’m guessing a limit of about 18 or 19.

I put a max of 20 in script, so you couldn't go crazy and wreck the header, think I should bump up to 25?

 

[jksmurf]

I put a max of 20 in script, so you couldn't go crazy and wreck the header, think I should bump up to 25?

TBH 20 is probably fine but 25 could help those with only one node (the irony being they don’t get confused by nodes with the same name, which promoted the request in the first place).

Folks with multiple nodes will struggle but having the flexibility for Main and single node users can’t hurt. It allows you to put model and a nickname. Hopefully they won’t complain when it looks awful on their 5 nodes…

 

[JB_1366]

v1.2.1-change nickname max to 25

 

[JohnD5000]

Just loaded this and it is not showing one of my nodes. How do I fix?

 

[jksmurf]

Just loaded this and it is not showing one of my nodes. How do I fix?

You’ll need to supply a bit more information than that.

Do your nodes all run Merlin FW? If the answer is no then that’s the reason. [EDIT; Author notes nodes can also be stock FW].
Did you follow this post, first link. If no then please run it to get passwordless ssh onto all your nodes first.
When done don’t forget to press refresh.

 

[JB_1366]

Do your nodes all run Merlin FW? If the answer is no then that’s the reason.

nodes dont have to run Merlin firmware, my nodes run Asus-stock, see my signature below
v1.2.4-edit update check pulse

 

[jksmurf]

nodes dont have to run Merlin firmware, my nodes run Asus-stock, see my signature below
v1.2.4-enhance update check pulse

Really, wasn’t aware of that, I thought passwordless SSH only worked on Merlin FW. My mistake.

 

[jksmurf]

v1.2.4-edit update check pulse

Did I miss v1.2.2 and v1.2.3?

 

[junior120872]

Really, wasn’t aware of that, I thought passwordless SSH only worked on Merlin FW. My mistake.

I did notice though ssh passwordless only works on one ssh key for the mesh nodes that don't run merlin. Meaning if you have more than one ssh key, you need to put the passwordless ssh key as the first one. The merlin router can handle multiple ssh keys so any addition keys from other devices will only be added to merlin routers.

 

[JB_1366]

Did I miss v1.2.2 and v1.2.3?

sorry, i think i added more options for update frequency.

v1.2.5-IP column, 4th octet alignment