YazDHCP YazDHCP v1.0.8 - Feature expansion of DHCP assignments (increasing limit on the number of DHCP reservations)

[Martinski]

Release Notes for YazDHCP v1.0.8 production release now available
[2025-May-29]

The fork from @Jack Yaz's repository is now hosted on the AMTM-OSR GitHub repo:

GitHub - AMTM-OSR/YazDHCP: Feature expansion of DHCP assignments using AsusWRT-Merlin's Addons API to read and write DHCP assignments, increasing the limit on the number of reservations.

Feature expansion of DHCP assignments using AsusWRT-Merlin's Addons API to read and write DHCP assignments, increasing the limit on the number of reservations. - AMTM-OSR/YazDHCP

github.com

1) FIXED: Errors when loading the webGUI page on the 3006.102.x F/W version.

2) FIXED: Some compatibility issues with 3006.102.x F/W version.

3) IMPROVED: Check if a USB-attached drive is mounted to back up the custom icon files.

4) IMPROVED: Check if any of the 3 files added to "dnsmasq.conf.add" are empty before actually adding them.

5) IMPROVED: Avoid restarting the dnsmasq service too often & unnecessarily.

6) IMPROVED: Modified code to set the corresponding priority level of log entries when calling the built-in logger utility.

7) IMPROVED: Added "export PATH" statement to give the built-in binaries higher priority than the equivalent Entware binaries.

8) Miscellaneous code improvements & fine-tuning.

 

[Dezzo]

Could you please tell me how to switch back to the main branch from the develop branch? I tried the same command that I used previously to switch to the develop branch, but I replaced "develop" with "master" and it wasn't accepted.

I had previously switched so I could download the 1.0.7.
Using amtm

 

[Martinski]

Could you please tell me how to switch back to the main branch from the develop branch? I tried the same command that I used previously to switch to the develop branch, but I replaced "develop" with "master" and it wasn't accepted.

I had previously switched so I could download the 1.0.7.
Using amtm

To switch to master/production branch:

/jffs/scripts/YazDHCP stable

 

[Dezzo]

To switch to master/production branch:

/jffs/scripts/YazDHCP stable

Thank you very much, got 1.0.8 now.
YazDHCP is what makes the router usable for me.
Hopefully it can be integrated into Merlin directly at some point

 

[aldweb]

YazDHCP is what makes the router usable for me.
Hopefully it can be integrated into Merlin directly at some point

I wouldn't have written it better!

Thank you Martinski for this great upgrade.

Cheers,
aldweb

 

[jksmurf]

Fantastic and huge thanks to all you folks combining to continue these Addons via the AMTM-OSR repository. Such a great Addon.

 

[cysio528]

Great work! Thank you guys.

Would it be possible to assign IP to device in guest network?

 

[bennor]

Would it be possible to assign IP to device in guest network?

How to assign manual IP reservations to guest network/guest network pro clients are discussed elsewhere. For non 3006 Asus-Merlin firmware see my post at the following link that has an example of how to setup manual IP reservations (while running YazFi) for Guest Network clients.
https://www.snbforums.com/threads/y...inc-ssid-vpn-client.45924/page-32#post-473403

For 3006 Asus-Merlin firmware see this post which describes two methods: https://www.snbforums.com/threads/a...-4-is-now-available.94651/page-26#post-958305
More 3006 discussion here: https://www.snbforums.com/threads/s...om-3006-routers-with-guest-network-pro.94184/

Currently the YazDHCP addon does not backup or restore (YazFi) Guest Network/3006 Guest Network Pro manual IP reservations.

 

[lepa71]

Do I need to uninstall the original version?

 

[ExtremeFiretop]

Do I need to uninstall the original version?

Update through AMTM if you can.

 

[lepa71]

Update through AMTM if you can.

So just execute "/usr/sbin/curl -fsL --retry 3 "https://raw.githubusercontent.com/AMTM-OSR/YazDHCP/master/YazDHCP.sh" -o "/jffs/scripts/YazDHCP" && chmod 0755 /jffs/scripts/YazDHCP && /jffs/scripts/YazDHCP install"?

 

[ExtremeFiretop]

So just execute "/usr/sbin/curl -fsL --retry 3 "https://raw.githubusercontent.com/AMTM-OSR/YazDHCP/master/YazDHCP.sh" -o "/jffs/scripts/YazDHCP" && chmod 0755 /jffs/scripts/YazDHCP && /jffs/scripts/YazDHCP install"?

1. Enter "amtm" in ssh to view the repo of available scripts.
2. Confirm it detects your YazDHCP install.
3. Enter "u" to check for updates.
4.Update through the scripts regular update process.