NTP Problem

[connorm]

here is the issue im having

Running in Router mode but as an AP

once i setup the script to run at every boot i can connect to the router over the internet

initially i noticed NTP wasnt working, but i figured once the default gateway was entered the issue would be fixed, however it is not...

im using ca.pool.ntp.org as my ntp server

this message keeps popping up in my logs

notice how the time on the logs is wrong haha, almost every reboot the router just picks a random time to start from lol

Aug 4 09:25:12 hour monitor: ntp is not syn
Aug 4 09:25:42 hour monitor: daemon is starting
Aug 4 09:25:42 hour monitor: ntp is not syn
Aug 4 09:26:12 hour monitor: daemon is starting
Aug 4 09:26:12 hour monitor: ntp is not syn
Aug 4 09:26:42 hour monitor: daemon is starting
Aug 4 09:26:42 hour monitor: ntp is not syn
Aug 4 09:27:13 hour monitor: daemon is starting
Aug 4 09:27:13 hour monitor: ntp is not syn
Aug 4 09:27:42 hour monitor: daemon is starting
Aug 4 09:27:42 hour monitor: ntp is not syn
Aug 4 09:28:12 hour monitor: daemon is starting
Aug 4 09:28:12 hour monitor: ntp is not syn
Aug 4 09:28:42 hour monitor: daemon is starting
Aug 4 09:28:42 hour monitor: ntp is not syn
Aug 4 09:29:12 hour monitor: daemon is starting
Aug 4 09:29:12 hour monitor: ntp is not syn
Aug 4 09:29:42 hour monitor: daemon is starting
Aug 4 09:29:42 hour monitor: ntp is not syn

this was also appearing in the logs around the time of boot


Jul 31 17:04:42 kernel: TCP: time wait bucket table overflow
Jul 31 17:04:42 kernel: TCP: time wait bucket table overflow
Jul 31 17:04:42 kernel: TCP: time wait bucket table overflow
Jul 31 17:04:42 kernel: TCP: time wait bucket table overflow
Jul 31 17:04:42 kernel: TCP: time wait bucket table overflow
Jul 31 17:04:42 kernel: TCP: time wait bucket table overflow

would be nice to get NTP going

 

[faria]

Use An Ip (199.182.221.110) instead of ca.pool.ntp.org .

as for the time wait bucket problem got to: http://192.168.1.1/Main_ConnStatus_Content.asp
press Refresh and check witch device is the problem.

 

[connorm]

still didnt work.....

and yeah i thought of the IP instead of regular address doesnt work, the router cant even ping out to 8.8.8.8

 

[connorm]

@RMerlin

any thoughts?

 

[faria]

@RMerlin

any thoughts?

Do you have dnscrypt loaded?

 

[connorm]

No pretty sure not where can i double check?

 

[connorm]

well, i added manual route so 0.0.0.0 all goes to 192.168.1.1

now i can ping google etc, i can ping the ntp server, however NTP is still not working...

 

[connorm]

yup as i expected its a bug stemming from asus/merlin fw http://www.snbforums.com/threads/rt-ac68u-wont-sync-ntp-v-378-56.27872/


nvram set link_internet=2
service restart_ntpc

fixed it

 

[connorm]

So now that i got that working im noticing this happening in my logs starting right after i fixed this around 8:30 my time (pst) last night

smbd[6931]: [2016/01/12 20:42:56.460278, 0] ../libcli/auth/ntlm_check.c:54(smb_pwd_check_ntlmv1)
Jan 12 20:42:56 smbd[6931]: smb_pwd_check_ntlmv1: incorrect password length (74)
Jan 12 20:42:56 smbd[6931]: [2016/01/12 20:42:56.485492, 0] ../libcli/auth/ntlm_check.c:54(smb_pwd_check_ntlmv1)
Jan 12 20:42:56 smbd[6931]: smb_pwd_check_ntlmv1: incorrect password length (74)
Jan 12 21:00:18 disk_monitor: Got SIGALRM...

 

[connorm]

@RMerlin you might wanna fix this as it is very easy to fix and clearly stemming from merlin-wrt/asus-wrt