Hello,
I'm using AC66U with Merlin's 380.59 firmware.
I configured SSH tunnel with public key authentication. The problem is that it disconnects randomly. When it disconnects I don't have internet on all other computers in my network and can't log to on to the router. It looks like the WAN is down for few seconds. This is what I have in log:
What I did:
- SSH tunnel on my NAS is working fine
- I used PuTTY and Bitvise as a client - on both disconnects
- try different values for keepalive(0, 10, 60) on client side - doesn't change anything
- "enable TCP keepalives" - doesn't change anything
- MTU on my desktop is 1500
- probably found the end of internet during my research ;-)
Thank you for help.
ps
Merlin is doing great job
I'm using AC66U with Merlin's 380.59 firmware.
I configured SSH tunnel with public key authentication. The problem is that it disconnects randomly. When it disconnects I don't have internet on all other computers in my network and can't log to on to the router. It looks like the WAN is down for few seconds. This is what I have in log:
May 24 10:22:25 dropbear[1378]: Pubkey auth succeeded for 'admin' with key md5 97:d4:a4:eb:0d:45:46:26:66:85:45:14:ad:85:dd:f3 from 5.172.252.241:5649
May 24 10:22:48 dropbear[1376]: Exit before auth: Exited normally
May 24 10:30:25 dropbear[1378]: Exit (admin): Error reading: Connection timed out
May 24 10:31:02 dropbear[1388]: Child connection from 5.172.252.241:15914
May 24 10:31:12 dropbear[1388]: Pubkey auth succeeded for 'admin' with key md5 97:d4:a4:eb:0d:45:46:26:66:85:45:14:ad:85:dd:f3 from 5.172.252.241:15914
May 24 10:22:48 dropbear[1376]: Exit before auth: Exited normally
May 24 10:30:25 dropbear[1378]: Exit (admin): Error reading: Connection timed out
May 24 10:31:02 dropbear[1388]: Child connection from 5.172.252.241:15914
May 24 10:31:12 dropbear[1388]: Pubkey auth succeeded for 'admin' with key md5 97:d4:a4:eb:0d:45:46:26:66:85:45:14:ad:85:dd:f3 from 5.172.252.241:15914
What I did:
- SSH tunnel on my NAS is working fine
- I used PuTTY and Bitvise as a client - on both disconnects
- try different values for keepalive(0, 10, 60) on client side - doesn't change anything
- "enable TCP keepalives" - doesn't change anything
- MTU on my desktop is 1500
- probably found the end of internet during my research ;-)
Thank you for help.
ps
Merlin is doing great job