My 3TB USB3.0 hard drive fails to auto-mount after the RT-AC68U reboots. I'm running 380.63_2.
I never had this problem before upgrading to 380.63_2. I now have to manually unplug the hard drive, and re-plug it. It mounts as it should and everything works until the next reboot. It is permanently connected to the USB2.0 socket, since previous firmwares had problems auto-mounting USB3.0 disks in the 3.0 socket.
I just tried swapping to the more appropriate USB3.0 socket and it seems to auto-mount fine after reboot, but so is now the USB2.0 socket. So it might just be a intermittent problem, but it have happened perhaps 10 times after the firmware update (20 days). I've attached syslogs when the USB3.0 disk is plugged in both 2.0 and 3.0 sockets.
Looking through the syslog, it also seems the router system time is reset to 1 Aug 02:00:00 when rebooting, and stays with this date/time until NTP starts updating. Not a big deal, but makes the syslogs messy.
Anyone having the same problem, or any solution?
I never had this problem before upgrading to 380.63_2. I now have to manually unplug the hard drive, and re-plug it. It mounts as it should and everything works until the next reboot. It is permanently connected to the USB2.0 socket, since previous firmwares had problems auto-mounting USB3.0 disks in the 3.0 socket.
I just tried swapping to the more appropriate USB3.0 socket and it seems to auto-mount fine after reboot, but so is now the USB2.0 socket. So it might just be a intermittent problem, but it have happened perhaps 10 times after the firmware update (20 days). I've attached syslogs when the USB3.0 disk is plugged in both 2.0 and 3.0 sockets.
Looking through the syslog, it also seems the router system time is reset to 1 Aug 02:00:00 when rebooting, and stays with this date/time until NTP starts updating. Not a big deal, but makes the syslogs messy.
Anyone having the same problem, or any solution?