sajjadhussaini
New Around Here
Hi Guys,
I'm new to this NAS servers setup and Access. I recently bought the Zyxel NAS326 after reading all the reviews online. Now my problem is I cannot access to my NAS-326 Media Server even after I followed the 3 level steps which was mentioned in the instructions.
Firstly I used the link http://findme.zyxel.com and I recognized the NAS-326, But when I want to access the admin page from the following link it shows some error and say's not reachable or cannot be reached to local IP of NAS I have set it to (192.168.0.100) from my Router (D'link DIR-615) Not sure how far my Dlink DIR-615 router supports my NAS-326.
I searched from google many websites including this forum to troubleshoot this problem, I came across with port forwarding and I added the local IP (192.168.0.100) in port-forwarding for both TCP & UDP as guided to 80, 8080, 8082, 2099, many more, etc.. when I tried again, even than it didn't work. Same error was shown.
UPNP under the setting was enabled, I tried by disabling that and again it failed.
Anyone who is expert on this, Please help me guide fix this issue and run my Zyxel NAS-326 in my home network.
Thank you soo much in advance.
Regards,
Sajjad
I'm new to this NAS servers setup and Access. I recently bought the Zyxel NAS326 after reading all the reviews online. Now my problem is I cannot access to my NAS-326 Media Server even after I followed the 3 level steps which was mentioned in the instructions.
Firstly I used the link http://findme.zyxel.com and I recognized the NAS-326, But when I want to access the admin page from the following link it shows some error and say's not reachable or cannot be reached to local IP of NAS I have set it to (192.168.0.100) from my Router (D'link DIR-615) Not sure how far my Dlink DIR-615 router supports my NAS-326.
I searched from google many websites including this forum to troubleshoot this problem, I came across with port forwarding and I added the local IP (192.168.0.100) in port-forwarding for both TCP & UDP as guided to 80, 8080, 8082, 2099, many more, etc.. when I tried again, even than it didn't work. Same error was shown.
UPNP under the setting was enabled, I tried by disabling that and again it failed.
Anyone who is expert on this, Please help me guide fix this issue and run my Zyxel NAS-326 in my home network.
Thank you soo much in advance.
Regards,
Sajjad