Menu
What's new
By:
Filters Better Search

Recent content by autourdesam

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. A

    RTAC68U Fw386.12 Openvpn ping packet loss

    Hi every one. Still having some problem with OpenVPN in firmware 386.12 between two RTac68u Site 1 = nas1 (192.168.3.8) + Pc1 <-> RTac68u_FW386.12 (192.168.3.1) <==internet==> Rtac68u_Fw386.12 (192.168.13.1) <-> Pc2 + nas2 (192.168.13.8) = Site 2 My goal is that any Pc of site 1 can...
  2. A

    RT-AC68u 386.12 Ovpn client down after few days

    Hello , I used VPN client on RT-ac68u 386.7.2 (192.168.3.0/24) to another remote RT-AC68u 386.7.2 (OVPN server mode lan 192.168.13.0/24) with no issue for a long time . I upgraded the router to FW 386.11 on a fresh install ( hard reset + fw upgrade+ hard reset again + new manual conf for...
  3. A

    Unable to flash Merlin on RT-AX58U

    Hello everyone I bought 3 months ago a RT-AX58u to have Merlinwrt on it (like I use on my olds RT-ac68u) but unfortunatly it was a V2 ... and I did not succeed in an upgrade to Marlinwrt. Even the original Asus firmware could not be upgraded ... I wrote to Asus support and they sent me a link...
  4. A

    Release Asuswrt-Merlin 386.4 is now available

    Hi everyone , First of all : all my best wishes for 2022 ;-) Sorry for my "novice" question , but I have "configurations" on many RT68U-AC in 386.3_2 and 384.19 that I don't want to loose . Usually I redo again conf from a factory reset (bad experiences long time ago with merlinwrt or...
  5. A

    [SOLVED] RT-AC68U HW:E1 FW 386.3_2 no wifi 5Ghz issue

    Well done :-) !!! That solve my issue !!! Incredible !!! Many thanks ! Please note that this time the section Modulation Scheme option appears :-)
  6. A

    [SOLVED] RT-AC68U HW:E1 FW 386.3_2 no wifi 5Ghz issue

    Please note that same router with HWA2 works fine . Please note that pop up on the Wifi icon in web ui show channel 0 even if I choose a different channel Please note that in E1 Professional section there is no Modulation Scheme option , instead of this possibility in A2 section ...
  7. A

    [SOLVED] RT-AC68U HW:E1 FW 386.3_2 no wifi 5Ghz issue

    Hello, My RT-AC68U in hw E1 with Merlin fw 386.3_2 can't have Wifi 5Ghz enable even if in Wifi /professional section it is enable ... For 2.4Ghz I can enable and disable it , but not for 5Ghz band ... Because I read many threads , I tried to choose channel 36,40,44 instead of auto mode...
  8. A

    Using 6 RTAC68U , same issue ...since 380.57

    Please note that : Memory is 78MB Used , 172 MB free (so 31% used) Core2 is 100% used I can navigate in web interface from lan side For SSH , I can give user : admin and password but there is no prompt to go further . The router is started since 22 days 20 hours 4 minute(s) 47 seconds and...
  9. A

    Using 6 RTAC68U , same issue ...since 380.57

    Hi , I actually have my personnal RTac68u with one core at 100% ! FW is 363_2 ... I have saved syslog and netstat ... RMerlin what can I look/give you to help to diagnose the issue before I restart the router ? Thanks a lot
  10. A

    Using 6 RTAC68U , same issue ...since 380.57

    @wocram and the others who have a perfect stable connection : - do you have enable TrafficAnalyzer>Statistic then click sur ON ??? - do you often manage your router(s) remotly from WAN interface ? - do you have many clients from Lan interface (more than 40 simultaneously) ? - do you have...
  11. A

    Using 6 RTAC68U , same issue ...since 380.57

    @bbunge : thanks for these threads . In the second one , I can read : For me it is important to have the "story of usage by who" for the last 30 days ... but I didn't mind to "reset" each day the actual list of clients in network map .... All RTAC68U I use are with a 380.xx fw .... so do...
  12. A

    Using 6 RTAC68U , same issue ...since 380.57

    Thanks for your answer and your interest for my case. No router use USB Stick and I didn't use any AiCloud2.0 options or USB applications . I only use Menus : General : Network Map , Traffic Analyzer Advanced : Wireless (General only on almost and only one with Professional Tx Power...
  13. A

    Using 6 RTAC68U , same issue ...since 380.57

    Can you tell me more about that ? Which script ? I must recognize that the ones that are less use have only few issues ... the more sollicated ones have more time those issues, particullary the ones with Wifi uses I think ... P.S. : I forget one... it is 7 , not 6 ;-) ... but this last...
  14. A

    Using 6 RTAC68U , same issue ...since 380.57

    Hi all , I am using 6 different RT-AC68U (work, friends and personnal) since firmware 380.57 ( the first one I used as far as i remember) and one RTAC66U (still with 380.57) . They replaced Linksys E2000 with Tomato Shibby or DDWRT because of the better web interface design of MarlinWRT and...
  15. A

    [Release] Asuswrt-Merlin 380.62_1 is now available

    I detect a little bug : when you try to edit a VPN PPTP acount , the field's names are not according to what they are supposed to design : asking for network/hostIP and netmask instead of name/password .
See more
Top