Recent content by bookedirl

  1. B

    AXE16000 upload speed issues 6ghz & 5ghz

    4 drives in the 920+ they’re wd red pros. Also have m.2 cache. They’re in raid 6 I believe. I did speed tests (using their benchmark program) on each drive within the synology OS and tests were good. Also, speed is good when connected through ethernet so I don’t think its the drives. Same with...
  2. B

    AXE16000 upload speed issues 6ghz & 5ghz

    Topology > AXE16000 > 10gbe port on router > 2.5gbe Switch > Synology NAS. I have 2 connections to the NAS one using the ethernet port in the back and one via USB to utilize the 2.5gbe connection. I have reset my router to factory settings both using Asus firmware and merlin. Both with a hard...
  3. B

    AXE16000 upload speed issues 6ghz & 5ghz

    Sorry for not clarifying! I do have ai-mesh, Also have an AX86U and an AX3000, but everything is connected to the 2.5gbe switch. The synology is connected to the 2.5gbe switch and that switch feeds off the 10GB port of my axe16000. WAN is on 2.5GB port on the axe16000. The first trouble shooting...
  4. B

    AXE16000 upload speed issues 6ghz & 5ghz

    I'm havin some issues with upload speeds between my devices which seems to be only on wifi. I'm currently uploading between my NAS / other PC on the network (2.5gbe backhaul) at around 15MB/s. I can download from both of them around 180-212 on the high side when connected through wifi. What...
  5. B

    USB to 2.5Gbe adapter on AX88U

    Would this work on any other ax routers? I have an ax-58u/3000 that could use some new life.
  6. B

    GT-AXE16000 Owner's Thread

    So after some troubleshooting I figured it out...well google helped. The latest intel driver does not work. I had to manually install driver version 2.45.1.1 for 6GHz to show up.
  7. B

    GT-AXE16000 Owner's Thread

    Finally finshed setting this beast up... Any idea why my laptop with an intel ax210 can't see the 6GHz band? It shows it's active on the router but only the 3 other bands show up.
  8. B

    Outdoor Enclosure for RT-AX88U

    I'm planning on attaching this under the deck which is about 4ft off the ground and near an existing outdoor oulet. I would only need to run the ethernet cable. But yea, I would need a water proof enclosure that is ventilated. It would be in the shade so that would help considerably.
  9. B

    Outdoor Enclosure for RT-AX88U

    Hello, I have an AX88U that I would like to put outside for for better wifi coverage in the back yard/deck. It will be about 50ft away from the house and have an outdoor rated ethernet backhaul to connect to the aimesh system. Can anyone recommend any enclosures that would fit this massive...
  10. B

    Bypass Zyxel fiber gateway with my AX58U?

    Any chance you figured this out? I'm also in Southern NH and Just had CC Fiber installed. They have me on an ADTRAN 834-5 and It doesn't allow for you to split the 2.4 and 5G bands. I believe though devices will automatically select the best frequency to use. I'm going to play with it tomorrow...
  11. B

    AB-Solution - The Ad Blocking Solution

    I updated to merlin 380.68_2 and I'm getting an error after checking installation: checking /etc/dnsmasq.conf file found /etc/dnsmasq.conf is missing content /etc/dnsmasq.conf is missing content I searched this post and saw a similar question and I couldn't fix the problem. Does anyone...
  12. B

    Asuswrt-Merlin 378.56 is available

    Has anyone had issues with an iPhone 6S constantly dropping connection? I have an iPhone 6 that has no issues but my wifes iPhone 6S is. Not sure what's causing it. I tried both bands and they have the same result. I normally wouldn't care so much but my wife is nagging me :) Running 378.56 on 87u
  13. B

    [SOLVED] dnsmasq-dhcp posting every ~30mins

    Thank you sir! that was my problem.. wasn't editing from the DHCP lease page. :)
  14. B

    [SOLVED] dnsmasq-dhcp posting every ~30mins

    So, I do have a samsung TV. I created a static IP for it. I also renamed all my devices in the network map to something other than their default names but I still get a the same localhost issue. This is happening on both bands as well as my ethernet ports.
Top