Recent content by CarlyElise

Does anyone know why i have these requests from external addresses? will blocking these result in any service interruption from my ISP?

I would like to create a python script for Spunk to be able to add a block as an action for searches that meet a specific search criteria... i don't seem to find anyone else using scripts to automate skynet ... is that something you're interested in by chance?

Regarding Disconnection issues, i have an RT-AX86U and a RT-AX88U each on their own 1gb connection connected through an Aris S33 modem. DHCP is on aggressive. I have had no issues at all with the internet connection dropping and getting consistently between 700-1100 mbps on RCN in Chicago. I do...

Yup, doing a reset seems to have cleared everything up. I'm going to let it run for a couple days without the drive and entware/addons and do that after a bit.

I am also having serious slowness issues. Dirty upgrade from stock firmware on brand new AS86U... Am going to try to do a reset and set it up from scratch... :(

So i have a very strange scenario and issue. I have RX88U and an RX86U both were dirty upgraded to 386.3. The 86U was upgraded from stock and the 88U was upgraded from 386.2. I have Bluesound Node 2i streamer that i use and connect to it using the iphone app and my macbook to control music...

I was using two USB drives and noticed my memory would max out when both were attached. I have gone back to one drive for my jffs volume and memory is steady around 450 meg. My update path was 384.x->386b1->386b2->386b3->386b4->386b4(2) RT-AX88U. No issues with the second beta 4 and so far...

Has Beta 4 for the RT-AX88U been released? i'm seeing discussions on beta 4 but don't see it anywhere. Thanks

I am seeing the same thing on an AX-88U with Beta 3 RAM Used 907 MB Free 117 MB Total 1024 MB

I did this and thought it resolved it but it didn't i did reset the cable modem (Arris sb8200) and that definitely seemed to help. but it has still occurred a couple times since but definitely better. I decided to complete redo my home network so yesterday I moved everything into my office...

having the same issue the log entry only reads WAN_Connection: ISP's DHCP did not function properly. Nothing unusual before or after

I have been seeing the same issues with beta 3 ... 34 clients mix of wired and wireless. 12 wired 14 5g and 7-8 2.4g everything is fine running great but then router disconnects from ISP. after a couple minutes it comes back up. I have had to reboot a couple times to get it back online...

Thank you Merlin for your ongoing efforts with this project! ISSUE found that is affecting firewall logging. It appears that it is not logging the OUT port information which is needed to determine the direction of traffic (inbound/outbound) This changed in the previous alpha. I have uninstalled...

I was running the Alpha and have not done a factory reset in a long time. Is it acceptable to backup configs and jffs (if needed) volume and restore both (if needed) after the reset? or best to screen shot everything and start from scratch. ALSO i have found since the last alpha that outbound...

I found that the TrafficAnalyzer.db and nc (Notification Center) were taking up the space. I have TA turned off but it kept the old data when I was testing it. I went into /jffs./.sys and deleted both from there. Hope that helps. ... also, 'du' in any directory will tell you what is taking the...