Menu
What's new
By:
Filters Better Search

Recent content by CrunchyInside

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. C

    What causes my 230Mb/s Cap?

    Actually I'd rather delete the thread now if I can. The last time this came up it was because the reboot scheduler via the web app was doing something to slow me down. I'd switched over to using the entware scripts to autoschedule reboots. Now it seems that turning that off has solved my...
  2. C

    What causes my 230Mb/s Cap?

    Every once in awhile I come into a situation where my FIOS connection only performs at about 1/3 of capacity. Today is one of those days. I've plugged my test laptop right into the ONT from Verizon and I'm getting ~980MB/s. Then I plug into the ASUS and I get ~230MB/s. I've done all the...
  3. C

    Diminished Performance Problems -- 386.2_6 RT-AC5300

    I'm glad to hear it's been debunked numerous times. I had no idea it had ever come up before. Just for the record, I do not use QoS. I do have AI Protect enabled and have had it for years including now. Maybe correlation is not the same as causation, but I'm only seeing degraded speeds if I...
  4. C

    Diminished Performance Problems -- 386.2_6 RT-AC5300

    Here's an update on a finding. I took the advice and did a fresh install following a restore. Built up everything from scratch, and within a week the problem returned where it seemed I was rate limited at a cap of 200Mbps U/D. I did this three more times (over a series of three weeks), each...
  5. C

    Diminished Performance Problems -- 386.2_6 RT-AC5300

    Hi everyone, Using a RT-AC5300 I'm currently on 386.2_6 but started seeing this problem a few revisions back. Short version: my performance is down to only 1/3 of its capacity. I have gigabit ethernet and I'm getting ~330Mbps up and down. I did a full factory reset and the performance shot...
  6. C

    Diversion Diversion stopped working in 386.1_2

    Thank you very much for posting this. I had tried reinstalling Diversion but I hadn't thought about uiDivStats. I was able to get back online after doing a complete uninstall of both uiDivStats and Diversion(including removing the local backup). I'm in a much happier place now.
  7. C

    Diversion Diversion stopped working in 386.1_2

    Hi everyone, Last night I upgraded to 386.1_2 and things were good. My router went through a scheduled nightly reboot while I slept and this morning I had no external network access. After the usual hard boot and some debugging, I turned off Diversion and everything started working again. I've...
  8. C

    (Free) DDNS recommendation?

    Ha! Amazing what looking at the doc can do for you. I just tested it out too - I changed the IP variable to grab ${1} and it works just fine. Confirmed (via REST API) that Dynu had received the update after I ran the script. For completeness, here's the current version: #!/bin/sh...
  9. C

    (Free) DDNS recommendation?

    I'm not going to go that far. I believe that Dynu still supports their V1 API, so it probably still works. I went with V2 since I didn't want to have to figure it out all over again later if V1 stopped working. Also--and I don't claim to be a super-awesome admin type here when I say this--I...
  10. C

    (Free) DDNS recommendation?

    This is something of a "give it back" post in case anyone else is trying to use dynu for DDNS, which I did after the ASUS DDNS service stopped working. I also investigated a few of the services out there and I was looking for minimal touch (set it/forget it) as well as free. I went with dynu...
  11. C

    ASUS Firmware update problems

    OK I figured it out - flashing on wired works fine, but not on wireless. That is literally the only variable I changed. All set here.
  12. C

    ASUS Firmware update problems

    Assuming this is something of a catch-all "problems" post - I have an AC87U that won't upgrade to 384.10_2, at least not the second time around. I upgraded yesterday, ran into some trouble and rolled it back to 384.9. The problem was related to Stubby and DNS configuration, so I peeled that...
  13. C

    Diversion Diversion - the Router Ad-Blocker

    I went with the second option since my blocklists are the Diversion Standard. That seems to have done it. Thanks!
  14. C

    Diversion Diversion - the Router Ad-Blocker

    Hi everyone - first time post so apologies if I'm violating etiquette here. I'm having a problem getting PayPal pages, either direct or via payment pages, to load correctly with Diversion on. The config is: Merlin 384.7__2 Diversion 4.0.6 SkyNet/PixelServ-tls as installed via amtm 1.5 When I...
See more
Top