Recent content by dominik

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. D

    Unbound DNSSec with unbound_manager?

    Checked those several times trying both on/off: And current unbound section: I already know that router built in dnssec will conflict with unbound, all test above are with both options off.
  2. D

    Unbound DNSSec with unbound_manager?

    One of my services checking for dnssec flags and won't start without it :( It will fail to start doing dnssec validation and script is looking exactly for this flag inside queries trying: admin@router:/tmp/home/root# unbound-control get_option port 53535 admin@router:/tmp/home/root# dig...
  3. D

    Unbound DNSSec with unbound_manager?

    Hello, I'm using latest merlinwrt 388.1 on AX86U with unbound manager (v3.22) and can't get DNSSec to work :( With unbound turned on DNSSec validation is gone, please take a look at this example: admin@router:/tmp/home/root# dig @192.168.1.1 +adflag example.org A ; <<>> DiG 9.18.1 <<>>...
  4. D

    RT-AX86U Port Forwarding - load balancer

    Still no option for built in port forward load balancer? :(
  5. D

    Release ASUS RT-AX86 Series(RT-AX86U/RT-AX86S) Firmware version 3.0.0.4.388.20566

    I had same thing on ax86 with wg: after removing wireguard I was able to get 1G back again (about 25 Jun), without acelleration cpu was 100% on whole network traffic and just was not able to get full speeds that decreses on every move (jun 15 - skynet, jun 22 logs off). Still I'd love to...
  6. D

    Huge bandwith limit with skynet and others

    I just completely removed wireguard and flow accelleration is enabled again. quick test from spdMerlin - bandwidth jumped imidiately to 940Mbit/560Mbit Thank Colin for You suggestions - wg caused all those issues, now I'll try to find out more on that - is that known issue and are there any...
  7. D

    Huge bandwith limit with skynet and others

    Yes, one openvpn server but sure I also was playing with wg. I'll check that for sure, thanks for this clue.
  8. D

    Huge bandwith limit with skynet and others

    Runner is enabled, flow disabled, fc shows fc_disable=1 So, something disables this, I assume that I can try to enable it and repeat test, then try to find what and why it's disabled. Is there any log regarding this vars?
  9. D

    Huge bandwith limit with skynet and others

    The only thing that is different on my fc status output is last line - flow learning disabled, same max, active<0>, cumulative [ 295 -295 ]. Both qos and aiprotection should be disabled. While I expect that those features can have some impact on bandwidth it was claimed that skynet should not...
  10. D

    Huge bandwith limit with skynet and others

    I did not agree to anything trendmicro-related so all their features should be disabled, double checked that now - aiProtection is off and there is only ddns/asus agreement on privacy tab. What "other TrendMicro component" You mean? How can I check status of TrendMicro services (even if I did...
  11. D

    Huge bandwith limit with skynet and others

    Yes, about same thing - now (on isp peak hours) with skynet 450/345Mbit vs 580/440Mbit without. I tried that several time from few devices and also done some iperf3 test to make sure that ethernet get full 1GBit on network (it's about 940Mbit, sound ok)
  12. D

    RT-AX86U Port Forwarding - load balancer

    Hello, I would like to expose port on router and have some load balancer/failover for two devices. Let's say it's http:80 or http:443 on comp1 and comp2. Are there any load balancers available with some failover functionalities? (to have that running if one of comps are down). I know I can...
  13. D

    Huge bandwith limit with skynet and others

    Hello, Recently I moved from AC86U to AX86U and upgraded my ISP to 1G Internet connection. One of first things I've done was installing latest merlin, adding amtm and spdMerlin. Speedtest result was ~920Mbit download and ~600Mbit up. I left spdMerlin for few days and tweaked some settings...
  14. D

    RT AC68/AC86 antenna on cable

    They work together - do You know more about that? I'm trying to figure out what can be extended on cable, which antenna and what bands are there? As I said I was able to extend antennas on cables and get much better signal - but still I'm not sure if it's done correctly. Cables are cheap...
  15. D

    RT AC68/AC86 antenna on cable

    I read all that thread and decided to create new because I don't want to look for better antennas, just extend those on cables. I could not find any information how to do that, what and how it can be extended. My tests are promising :)
Top