Recent content by gkasica

Yes they're blocking it and have been since June of 2016 on Uverse. I run 3 Stratum-1 clocks here and dumped them as a provider after they refused to unblock my fixed IP block which they insisted wasn't blocked but had worked fine from the date of install some 6 years years earlier and just...

Do you think saving the settings and then reverting to NETGEAR firmware defaults and then reflashing would be worth an effort or is something else up?

Yes that's the procedure I followed - for upgrade. I also tried .67 with similar results to .66 no internet or 5Ghz. Sorry forgot to mention it above. I initially went from 62 to 67 then 64 to 66. Then back to 62. The only ones that had internet were 62 and 66 none now have 5Ghz. The odd thing...

I just updated the firmware on my R7000 from XVortex 360.62 to 360.64 with the trx file and after that it refused to connect via internet on Wireless. Ethernet wired was fine. I thought I'd then go with the latest release 360.66 and that got the internet back but no 5GHz radio channel will come...

Yes - anything wired or Wireless MacBooks can print.

Given the issues I'm having I'm going back to Netgear firmware or dd-wrt. It seems that none of the 3 support AirPrint so there's not much reason to be running non stock FW for us here. As for non-ASUS device running ASUS FW I wasn't aware it was theirs I was under the impression this was open...

OK folks can I get SOME kind of a consistent answer with this? I've got 4 responders and 5 different answers on the things. This band that band, this channel that channel. I'm not the R7000 air print expert. If I wait wouldn't be asking for help. Everytime I'm making these changes I'm...

I've got the VPN up and it works beautifully from away from the local network or via LTE cellular, I'm curious to know if you can make any changes to the login process or script it seems to use to also allow it to connect while on the Local LAN/WiFi? It's not a huge issue but if I could get it...

Ok I've set them at 11 for 2.4GHz and 149 for 5GHz. Also 20MHz on each with no better success even moved the printer onto the private IP space so it was on the same sub-net as the iPhone/iPad devices doesn't get it showing up even by having it wireless vs. Ethernet connected.

Both 2.4GHz and 5Ghz are at auto. The Printer is on an a ethernet cable so no wireless is active. I do have the wireless module however installed (you can only run one or the other not both at the same time). It doesn't appear to allow selection: SSID netwrx1 Network Type Infrstructure MAC...

Hello: I've just changed internet providers from Uverse to a local high speed wireless carrier - Ethoplex here in Jackson WI. The reasons were cost, speed and AT&T was blocking ports that we needed after 10 years and wouldn't/couldn't/didn't know how to unblock them. Anyway the issue. I have a...

Need help getting NETGEAR R7000 running XVortex R7000_380.64_0 to show AirPrint printers