Recent content by jimtale

How did you restore to stock firmware, with Asus FW restoration tool ? The reason I ask is because I uploaded stock firmware and it wouldn't upgrade, still stayed on Merline 384.18. Thanks !

Hi Merlin, thanks for your help !

Hey guys, I know we can set QoS to say have the router prioritize VOIP traffic, FTP traffic on certain port connections over the rest of traffic. But I was wondering if we can prioritize web surfing traffic over heavy downloading traffic with both on port 80. Heavy download traffic would be from...

Since everyone is using 10k , I am gonna try 10k tomorrow.

I understand, but I don't have the tiny resistors, only the standard size. Electrically it is the same, pin 21 to Vcc, the other 3 pins on the same row are: Pin 19 (A17) → VCC Pin 16(WP) → VCC Pin 17(RY) → VCC Pin 21 is A6, I am not sure why it should be pulled up, but it is pulled up now.

What do you mean ? It's Pin 21 to Vcc, same as other 3 pins.

Here we go, my soldering skill is not something I am particularly proud of , lol. But hey I checked, no shorting betwen pins, connections are perfect !

Ok, I will have to find a resistor tomorrow, I guess 4.99K didn't cut it, I will report back, thanks !

I got the following errors running these commands, it seems the flash is not responding, or I haven't initialized it correctly. Any suggestions ! init > flash info flash info bank_id in procedure 'flash' > flash info 0 Target not halted auto_probe failed in procedure 'flash' > flash...

Hello hggomes, Thanks for stopping by, I read many of your posts from this thread. :) So, yes init command was ok but erase_part CFE returned invalid command, here is the log:

Hey Joe, I am sure the CFE is bad hence the efforts. As of now, its just 3 solid lights instantly when powered up. No ethernet activity so Asus tool is no use in this case. With zJtag, and correct command like: zjtag -probeonly /l1:3 /isntrlen:27 /noreset, I can get some other lights flashed...

Hello all, I happened to have a bricked Asus RT-N66U with 3 LEDS on. My goal is to erase and flash CFE so hopefully it can boot again, Here are my procedures: Bought TUMPA JTAG usb thingy, connected TUMPA's JTAG to J1 of Asus, TUMPA TTL COM to J2 of Asus, I soldered 4.99K to pin 21 of Flash...