Recent content by laajr

I've been running Diversion standard on a AC86 with firmware prior to 386.4. I was unaware of any issues with pixelserv-tls. I updated to a AX86 and loaded 386.4. Reading through the forum, I see some are having issues with Diversion standard w/ pixelserv-tls and Trend Micro. Could you clarify...

I ran into the same issue (see "device full" thread). I had to reformat the JFSS partition. Traffic analyzer and journal were using most of the space. I've noticed a few others seeing the same issue. Since reformatting on 4-12 the partition has grown from 2.81/48 mb to 5.78/48 mb as of today.

Did you "format JFFS partition at next boot" to clean up? What other areas of the router would this affect?

Yep, mine shows 48MB, 48MB (AC86U). It sounds like TrafficAnalyzer.db is what it should be at ~31.5MB. So other items are eating up the NVRam .

My TrafficAnalyzer.db=31.5MB TrafficAnalyzer.db-journal=5.8MB nt_center.db=5.6MB WebHistory.db=5.1MB These are the four largest files

I've opened a new thread "Device Full" to discuss this in greater detail.

Opening a separate thread relating to "device full" issue. I had originally posted this issue in the AMTM thread and was found when trying to update AMTM. What I found was that the " /jffs/.sys/TrafficAnalyzer" file is taking most of the memory space and would not allow AMTM update (device...

I would agree that it doesn't seem to be an AMTM issue but was found when trying to update AMTM. Perhaps the device full has always been there but never seen. I'm for opening a new thread and will do so. I would appreciate if you respond on that thread on what command was used to erase the db...

"Don't know if has always been that way, or specific to 384.16_0, as have never had" I was running 384.15 when this occurred. I since have updated to 384.16. Can I clear just this db file? Not sure why this has just started to be an issue; just a coincidence that I am running scripts and the...

I've been running Diversion, connmon, uniDivStats for about a month. I've updated scripts prior to this device full error with no issues. TrafficAnalyzer.db is what is using all the memory on my router.

/jffs/.sys/TrafficAnalyzer/TrafficAnalyzer.db

Yes...... how do I identify the culprit?

Yes, it is shown 1k blocks=49152 used=49152 available=0% used=100% /jffs

Any thoughts on how to resolve this? Thanks

Been running amtm 3.1.5 and tried to update over SSH to 3.1.6 (86U running 384.15). Says device is full and backs out with 3.1.5 remaining. Reading through other threads I tried to clear my traffic data but said unable to do so because device is full. Scripts I'm running are Diversion, connmon...