Menu
What's new
By:
Filters Better Search

Recent content by le_communiste

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. L

    RT-AX92U AiMesh connection slows over time

    Check in your main router: Advanced Settings -> System Log -> Wireless Log To see the current connection speed and current connection channels between Router and Mesh Are the speeds indicated or the connection between Router and Mesh changing over time? To exclude external influences I would...
  2. L

    Nodes don't connect to Dedicated Wireless Backhaul

    Hi, My Dedicated Wireless Backhaul on my second 5 GHz channel of my main router (AX11000, Asuswrt-Merlin 386.3_2) is on a DFS channel. This means that the 5GHz-2 radio is not available until 10 minutes after a reboot or Wireless change on my main router. My nodes will connect in the meantime...
  3. L

    Slower than expected WiFi speed on Asus AX11000

    The AX11000 has two 5 GHz 4x4 streams with up to AX speed (160MHz). Check the System Log->Wireless Log to see connection speeds. My AX88U is connected with 4 AX Streams to the AX11000 main router: Most Phones, Tablets and Laptops support a maximum of 2x2 Streams. Some MacBooks have 3x3...
  4. L

    AX11000: the Control Channel (128) and bandwidth (160 MHz) that I set get reset after a few hours of uptime

    Well let's say it's hit and miss then. Before buying my setup (AX11000 and AX88u) I checked that my neighbors did not use DFS 5 GHz networks but unfortunately I live in proximity of a major airport. Since I have to use a DFS channel to use 160mhz on both 5GHz networks it's just a matter of...
  5. L

    AX11000: the Control Channel (128) and bandwidth (160 MHz) that I set get reset after a few hours of uptime

    Thanks for your remarks and replies - I'll have to live with it.
  6. L

    AX11000: the Control Channel (128) and bandwidth (160 MHz) that I set get reset after a few hours of uptime

    So what you guys are saying is that this is 'as designed according to 5 GHz specs' and that there is no reliable way to have the AX11000 run the two 5Ghz bands with 160 MHz each, which would be the only way to get close to the theoretical 11,000Mbps. Even if I configure the router to have two 5...
  7. L

    AX11000: the Control Channel (128) and bandwidth (160 MHz) that I set get reset after a few hours of uptime

    Hi, so I set the router manually to use Control Channel 128 and Channel bandwidth 160 MHz on the 2nd 5GHz Channel - this is how I receive the best Rx/Tx of my AiMesh connected RT-AX88U through the 2nd 5Ghz channel which I use as a Dedicated Wireless Backhaul(DWB). After a few hours of operation...
See more
Top