Menu
What's new
By:
Filters Better Search

Recent content by manman

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. M

    DSL-AC68U cant boot fully

    nobody ?
  2. M

    DSL-AC68U cant boot fully

    Would it be possible for somebody with a working DSL-AC68U to post the output of CFE's nvram show and reboot command?
  3. M

    DSL-AC68U cant boot fully

    i tried with many firmware but all firmware stop exactly in this line . maybe NAND have bad sector or another ? what informations is on NAND chip ? there is also a chip similar bios chip (8Pin flash chip). anyone know where the CFE program is dumped ?
  4. M

    DSL-AC68U cant boot fully

    Also i see this CRC fault in NAND : is normal ? Also i have Bad eraseblock , Scanning device for bad blocks Bad eraseblock 793 at 0x000006320000 1: set_action 0 "brcmnand" successfully unlocked. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. Empty flash at 0x0060325c ends at 0x00603800...
  5. M

    DSL-AC68U cant boot fully

    in PuTTY software with this command " flash -noheader : nflash1.trx " , i dont access to TFTP protocol. have fault CFE> flash -noheader : nflash1.trx Reading :: TFTP Server. ..tftp retry wait 0 Failed.: Timeout occured *** command status = -21 i can only flash firmware with Asus mini web and by...
  6. M

    DSL-AC68U cant boot fully

    in Boot process ,It always stays in this line .like that boot partition is smaller than program
  7. M

    DSL-AC68U cant boot fully

    after 3 days reading internet and hard try , I decided to discuss the problem here. I received a bad DSL-AC68U modem ,only power LED lightet but i can see CFE consol in recovery mode. i can upgrade various firmware without any problem . but modem can not boot .both wifi led ist off , ip address...
See more
Top