Recent content by Rassal

I am also getting this same problem with spdMerlin... it runs, but no charts... Is there any solution?

Today, i reverted back to 386.5_2, and not a single wifi connection drop on the Android phones... might test 386.7 to see if it works with the .7 and only the .7_2 suffers the wifi drops... Saw a good amount of posts about connection drops with 386.7_2 is there anything official about it...

Ok, i did not dream about this then... got 2 RT-AX86U (1 router mode, 1 bridge mode) with 386.7_2 and one of them (bridge mode) is dropping wifi clients... but only specific ones. Never happened before when i was on 386.5_2 or earlier. To a point where i reset to factory (nuclear reset) and...

Ok, found the parameters on the OpenVPN server, and added to OpenVPN client... i can now reach the 10.0.0.x subnet and all their IP's... thanks! Now i have to try and see if it works as i want it, now that the routes are working! Thanks a lot for the guidance!

There is NO VPN Client on any workstations... the VPN Server is the AX86U, and the VPN Client is the AC87U... i want to access both subnets that are in my house through the AX86U, through my cottage router (AC87U) and from the cottage, i want the TV Box to be able to see the 10.0.0.x subnet so...

If you check the diagram i posted... you can see what i want to achieve... the TV Box 4 i want to connect remotly to the ISP Modem that has the TV Sync Module. I want to be able to use the router AC87U that has a working OpenVPN client connecting to the AX86U OpenVPN Server... and when i am on...

I tried stuff... so the "Redirect traffic through VPN" was something i tried, and it did not work...

Here's a run down of what i want to achieve... maybe i explained the requirements wrong...

I am using merlin, not the OEM firmware.

I tried the "Redirect all traffic through the VPN" but whenever i enable this, i have no more internet access at all, can talk to the 192.168.0.x subnet still, can't talk to 10.0.0.x subnet with the VPN even if i do the push suggestion below...

I have a specific configuration i want to achieve... here's the rundown. I have a Modem at home Like a Comcast Xfinity X1 that my ISP provides for my TV Setup Box to work... this Modem is my cable modem but also a router, but i do NOT use this router for my home network, only as the MODEM and...

I tried to download 386.5 for AX86U, but it doesn't download... and i see also that there is 0 downloads for AX86U at version 386.5, so i guess there is a problem with the download file... which is why 0 people downloaded it for AX86U... i am able to download 386.4 withtout a problem... just 386.5

I second on that suggestion, that is how i got my router to get working when WAN drops... not so often, but this way, it comes back for me.

Here we go... my AP... router will get the same update if AP gets at least 7 days uptime without problem...

I did experience the "Dreaded" ISP's DHCP did not function properly. To resolve this, all i did was change the DHCP query frequency to "Continous mode" instead of "Aggressive Mode". I do not have an ONT, but a Docsis 3 cable modem with 500/500 speed, so like you had to get around some config to...