Recent content by RdeN

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. RdeN

    Custom firmware build for R7800 v. 1.0.2.50SF

    I used speedtest from a client connected via LAN to the R7800. First the R7800 configured as AP, resulting in 200Mbps. Then in router mode, resulting in 500 Mbps (ok 496 Mbps). Just to summarise the route the bits follow. ISP (fibre) --> Fibre Modem (Fritz Modem 7490) --> Lan Cat6 --> R7800 -->...
  2. RdeN

    Custom firmware build for R7800 v. 1.0.2.50SF

    I meant both Netgears... one acting as AP downstairs the other as AP upstairs. Both are connected to the fiber modem with cat6 cable which takes care of DHCP etc. Verzonden vanaf mijn iPhone met Tapatalk
  3. RdeN

    Custom firmware build for R7800 v. 1.0.2.50SF

    I am using a R7000 downstairs and a R7800 upstairs both in AP-mode. Both have a wired cat6 connection to the internet modem. The internet modem connects to fibre (500 Mbps up and down) and acts as DHCP server etc. Download speeds for both the R7000 and R7800 are around 200 Mbps. If I set up them...
  4. RdeN

    unsupported NAT-PMP version

    Thanks Merlin. I switched off about all services on my Netgear ReadyNAS device, and now the messages have gone. I don't which one was the culprit.
  5. RdeN

    unsupported NAT-PMP version

    Hi, I have a RT-N66U running 3.0.0.4.374.33_beta1. I see the following messages popping up. Btw, I saw it also appearing in the experimental Pixie Dust. Any ideas what it might be and what setting I have to toggle to get rid of it. Thanks, Ramon Sep 11 07:26:22 miniupnpd[402]...
  6. RdeN

    RT-N66U, 5Ghz, rMBP problems

    nvram set wl0_reg_mode=h This will enable enable 802.11d+h. I use a RT-N66U together with a MBA (2012). I use Merlins FW (26b). 802.11d was not enabled on the RT-N66U. After the command mentioned above, I have this: (standard input):wl0_reg_mode=h (standard input):wl1_reg_mode=off...
  7. RdeN

    uPnP not working?

    Hi, I am using Transmission on my Macbook with Mountain Lion. The port I have set to 51515, but it says port closed. Both on the router (RT-N66U) as on the modem uPnP is switched on. It used to work when I had a different router in the past, so I don't think the uPnP on the modem is the...
  8. RdeN

    Something is wrong, but what...

    I will give it a try.
  9. RdeN

    Something is wrong, but what...

    Hopefully solved. I had Dual WAN switched on (fail-over mode). Two cables from the modem to the RT-N66U (dual wan cable in LAN4). However Dual WAN was no longer enabled, I am not sure how it got disabled. Maybe it get's disabled after upgrading to a new FW. I upgraded a couple of days ago to...
  10. RdeN

    Something is wrong, but what...

    Lost_animal, Which Tomato version do you use. I see and tried a couple, but it says incorrect FW. Thanks, Ramon
  11. RdeN

    Something is wrong, but what...

    Hi, The Log is overflowing with messages as below. How can I rootcause this issue? There is clearly some client which playing games with me. I have RT-N66U behind the modem of my ISP. The modem serves as a DHCP server (192.168.1.xxx subnet) with a fixed IP for the RT-N66U. The RT-N66U...
  12. RdeN

    Port forwarding

    Hi, I get ECONNREFUSED - Connection refused by server messages if I try to reach my FTP server from the outside. This only happened after upgrading to 3.0.0.4.246.20 (Merlin build). I use port 20,21. I know this will conflict with the FTP access to the RT-N66U itself. But before it just...
  13. RdeN

    Asuswrt-Merlin 3.0.0.4.246.19 is out

    I cant find the New "Enhanced interference management" option under Wireless -> Professional. Should I reboot or reset after the firmware update? Btw, I updated from 220.18b.
  14. RdeN

    WAN DHCP Issue 18b

    Still after a couple of days it is working. No more resets were required. Case closed. Thanks for all replies.
  15. RdeN

    WAN DHCP Issue 18b

    The cable between router and modem is a new CAT6 cable. Today I changed the cable which comes from the telephone connection and goes into the modem. The one with two wires, just the plain old telephone cable. And since then I have hadn't a problem (yet). For the first times 8 hours without...
Top