Recent content by samuel

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. S

    Trying to check cpu temp and 2.4 and 5 wifi amps temp.

    Thanks ColinTaylor I'll check it out.
  2. S

    Trying to check cpu temp and 2.4 and 5 wifi amps temp.

    I have been tiring to use puddy and ssh to display temps, so far have found Cat /proc/dmu/temperature will display cpu temp but not the 2.4 and 5 wifi chips, found cat /proc/cpuinfo and it displays alot of info but not temps or cpu clock. I thinking sense Merlin fork which im running on my Ac68p...
  3. S

    Fork 380.57 HGG-FINAL

    Big diff between 378_55_3 and newest one 380_57 HGG final
  4. S

    How to use RT-N66U with iOS devices with one SSID and dual band?

    Cant help with your problem, I have same problem here. But I can report that its Not specific to your N66u router. I have AC68u and AC68p and both have same problem.
  5. S

    RT-AC68P (with upgraded CPU, NOT R or U)

    I thought they both had same power (80). But at most distance from router my iphone and a roku 3 would not connect to router, to my suprise with 68u solid connection. Also tx/rx were both higher also. It might just be me. Last saturday I setup 68u and it upgraded to 378.9313 firmware the 68p is...
  6. S

    RT-AC68P (with upgraded CPU, NOT R or U)

    I have done what your getting ready to do, and my AC68u performs way better on range than AC68p model. One year ago I ordered a new AC68u, while waiting I seen AC68p model at Best Buy and picked one up been using it for a year. Last weekend I opened AC68u model and am very happy, wish I had did...
  7. S

    Problem with Putty...

    Thanks guys, it works on my AC68p and does not work on N66r routers... Learned something new today.... Thanks again
  8. S

    Problem with Putty...

    Thanks Joe, I willupgrade to 378.52..
  9. S

    Problem with Putty...

    Hello, After installing Merlens 378.51 everything works except Putty. I can run the program and sign in but that's it. This is command I'm trying to run, wl txpwr_target_max and here is the response, wl: Unsupported. Thank you for any help..
  10. S

    RT-AC68P (with upgraded CPU, NOT R or U)

    AC68P stock Txpower Glad to hear the rt-ac68p has the Txpower set higher than 80 mw. I thought all Asus routers were set at 80mw. I just got one at BestBuy myself.
  11. S

    CUSTOM/FORK RMERLIN FIRMWARE

    Just installed 50.3 Everything working perfect here, Speed seems the same as Merlin 50 version. Thank so much to hggomes for his great work, makes it fun testing. Sam
  12. S

    CUSTOM/FORK RMERLIN FIRMWARE

    Thank you for quick reply, Im going by your thread that says nvram set pci/2/1/ccode=#a nvram set pci/1/1/ccode=#a nvram set regulation_domain=#a nvram set regulation_domain_5G=#a nvram set pci/1/1/regrev=0 nvram set pci/2/1/regrev=0 nvram set wl_reg_mode=off nvram set...
  13. S

    CUSTOM/FORK RMERLIN FIRMWARE

    edit nvram Need some help with Putty, using hggomes great fork look at this code. nvram set wl_txpower=youchoose nvram set wl0_txpower=youchoose nvram set wl1_txpower=youchoose looking at this code, the output using get command the answer is 100, would I replace the 100 to 150 and then...
  14. S

    CUSTOM/FORK RMERLIN FIRMWARE

    He said they will be backup when they are ready.
  15. S

    CUSTOM/FORK RMERLIN FIRMWARE

    Thank you, I guess I worded it wrong. I will try the one you sent link to. Regards Sam
Top