Recent content by skuba

Thank you. I could do one now and use as main router. Someone told me to instead get a 3 point Eero mesh and connect to the asus as bridge and I would be better off. Thoughts?

Hi. About 3 years ago I got a pair of AC68U and set them as AiMesh. Main router is one end of the house upstairs, other on other end of house downstairs. Worked well for the most part, except upstairs right in the middle of the house where one signal would get weak but not transfer to other...

Hi and thanks for all the feedback. Yes the walls are plaster and lath (with no metal on that I have noticed). Don't know how many times lead paint might have been applied, but it's also an assumption that there is lead paint because of age of the house. Just to be extra conservative, I had...

Hi, About a year ago I created a thread about weak WiFI signal in my house bedrooms. I mentioned that my house being from 1940 likely head lead paint in them. Some opinions were provided and I tried a few things but nothing worked to increase signal in the bedrooms. This week as I laid in...

Guys, my home was recently remodeled and I saw it down to the studs. I don't remember seeing any wire on the laths.

I can detect many networks from neighbors with 2 and 3 bars. All homes are from 1940 and would have about same lead paint amount.

Hi, I meant lead paint. Not metal on the wall. It's plaster and wood lath. Antenna are correct. I get very good speeds up to the dining room, but once passed dining room into the bedrooms drops big time. Weird thing is that ipad and iphone will show 1 and sometimes 2 bars of reception, but...

Moved to new home a couple of weeks ago. Was initially running a Motorola WR850G and had weak signal in the bedrooms. So spent $160 for the ASUS RT-N6U based on the great reviews about it's reach. I had very little improvement. Router is in the living room only about 35 linear ft from bedroom...

I have successfully setup an ASUS RT-N66U as primary router and a Motorola WR850G as a repeater. If both SSID are the same how can I tell which one my devices are accessing? I want to make sure the devices are flowing access from one to another depending on best signal. The repeater was setup...