ntp

Hi everybody, since some time, I have the issue that after a reboot vnStat is not starting, as it seems NTP sync is not fast enough for vnStat. Other scripts don't seem to have that issue and/or are waiting for NTP sync. What I see in the log after a reboot is: Currently I am running my AX86U...

Hello, I am using Tailscale as a VPN to my router, which is running Unbound. When I use my router as an exit node, the DNS address is shown to be those of 9.9.9.9, which I have as my WAN DNS. This behavior demonstrated with the setting "use local cache as system resolver" off. However, if I turn...

Hi, I have been using YazFi for some time and has been working very well for the most part. I have my security cameras on a VLAN with Internet access disabled as they are only for LAN. I have enabled NTP server on the router, but I notice the cameras do not get updated with the time and date. I...

Hi all - title pretty much says it all, but more details are below. I've read through several discussions (example) regarding killswitch changes/issues. FWIW, it appears to me that most have concerned OpenVPN instead of Wireguard connections. AFAIK, none cites issues with NTP sync on boot as a...

Hi All. I've been experiencing some very weird behavior and wondering if anyone could help point me in the right direction. I am lucky to have 2 separate fiber providers with infrastructure in my house. For the last couple of months I've been using both of them with the Dual WAN feature with...

Hi, Guys, I found my AX-56U router's syslog timestamp changed to May 5,2018 when I was reviewing the syslog file for trouble shooting. The router did not reboot for about 2 weeks and I had no power outage at home. After I narrowed down , I found this happened days ago when there was a storm...

Hi All, in my setup, I'm using YazFi to isolate the IoT devices from the main network and internet, and ntpMerlin to serve all the NTP requests any client may send. Everything is working fine on the ntpMerlin side since it is serving responses for queries coming from the main network and guest...

Hi, After a bit of hassle, I've managed to get ntpmerlin and chrony to be GPS-conditioned, so my router is now a stratum 1 ntp-server with millisecond accuracy. :) No need for a separate NTP-server, unless you want to use PPS. The guides I've found have been conflicting, so I thought I would...

I've got 2 RT-AX86U routers that use ntpMerlin configured with Chrony. In this installation, both routers are on different networks and configured as NTP servers. Everytime I reboot any of them, the router time gets synchronized correctly, but Chrony stops responding to NTP requests. When I...

Hello to everyone, long-time lurker, first time poster - please be gentle! I tried to find the answer for my question for days before posting, but to no avail, so here goes: I have a Synology NAS with a cloud-based D-Link camera for which I made a guest network with no Internet access...

I was monitoring Dnsmasq log through Diversion's option and saw that my router's NTP is making a lot DNS querys. I'm using NTPMerlin with Chrony as NTP server and every 15s approximately it makes a new query. Here is an example of the many requests made. Enter term to filter by [q=Quit]...

Hi all, I tried searching the forum, but I couldn't turn up any useful results. I'm running 3.0.0.4.386.41700 on an AX11000, and running into an issue with clients behind the firewall connecting to NTP servers. I was previously running a pfSense firewall on a VM, and the AX11000 as my Wi-Fi...

Hi. Since last night I am getting NTP Server Sync error. I haven't changed anything recently. The error is: "* Reminder: The system time has not been synchronized with an NTP server." Time showing in System log is: "Sat, May 05 10:18:02 2018" I have tried different NTP servers and pinged...

This is a funky issue and in fairness I'm not sure if I've had this forever. The other day I was checking the logs in my Orbi with Voxel and noticed the time was wrong. Recently I changed the NTP settings via the Web interface, I set the time zone to Pacific and the server to pool.ntp.org When...

Using a NTP server protected by DNSSEC will probably not work because the router has no correct time yet after a reboot? Would this help? How? https://marc.info/?l=openbsd-tech&m=156102757301757&w=2 Is anyone already using such a configuration? How?

I'm using the latest Merlin firmware but don't know if this is a Merlin problem or ASUS problem with the base firmware (on a ASUS RT-AC68U). My settings look like this: And I keep getting the yellow error msg in the screenshot. I've tried several different NTP servers, such as...

Very interesting blog post! I learned a few things. I've also set my Merlin sourced NTP server to; time.cloudflare.com per the article. No data yet, but looking at it over the next few days. https://blog.cloudflare.com/secure-time/

I have a simple question, how often does this new ntp client synchronize the router's clock?

Except of course, NTP calls from the NTP server itself. :) I have a local NTP server on my network (not the router itself). For silliness where specific ntp servers are hard-coded into devices, is it possible to redirect all ntp traffic to my local server and allowing only my local ntp server...

If you have a local time server on your network, below is a script that can be called from init-start to set your router clock as early as possible in the bootup sequence. Put it in /jffs/scripts and of course make it executable with chmod a+x fetch-ntp #!/bin/sh # # Script: fetch-ntp # #...