vpn asus merlin tunnel

Hello, I recently got the Asus RT-BE86U router. Current firmware: ASUS-WRT Merlin 3006.102.3 I’m connected via a 100 Mbps symmetric 5 GHz connection (UBNT LiteBeam 5AC Gen2) on the roof of my house. I have a public IPv4 NAT 1:1 adress. The real speed on the WAN without VPN is around 85-100...

Hello guys,question is,my router always on vpn,how can I exclude from vpn only one app which is install on firetv stick ?.In vpn provider settings(in my case is Astrill) have 4 options 1)All Wi-Fi thrue vpn 2)Exclude this sites 3)Only this sites 3)Only international sites out of China I tried...

I'm using OpenVPN with Merlin 388.2 on my Asus RT-AX86U PRO and only getting 20-50 (on a good day) Mbs. I pay for 300 Mbs and I get that consistently if I use the ISP modem directly with no VPN. When using VPN I connect to servers in North America but am located in Europe. Before buying this...

Hello everyone. Forgive me for possible errors in the text, I write through a translator. A question arose about the work of the VPN Director. There are no errors in the logic of its operation, the traffic is redirected as it should. But the speed of WAN, which is the Internet not through a VPN...

Hello, My need is a simple one. I would like to connect remotely into my Asus Merlin AX-88U router with OpenVPN. I have enabled and configured the VPN Server in the router settings as below: I am unsure if I need to add "Allowed Clients" section below and how that is configured, in...

Hi all, I am running ASUS-WRT Merlin, version 386.7 on my ASUS-RT-AX86U. My internet provider supports full dual-stack IPv6 and I have activated IPv6 on the router. Everything works fine. I have tested this at https://test-ipv6.com. When I turn on my VPN client, (Mullvad), The IPv4 traffic...

Hi, I wanted to set up a router VPN on my AC68U. I installed asuswrt_Merlin for that, and I see it's possible to create a VPN tunnel & set certain IPs to use VPN, exclude others. However, the only way to change from using the tunnel to not using it is by manually moving the IP. Is it possible...

I have a home network that supports several laptops over wireless and two servers (NethServer and a HikVision NVR) on copper. I have a FTTP connection to the Internet, and a single public IP address. The NethServer supports an email server, and three small websites, the HikVision NVR is...

New to the forum :) MY SETUP Router: AX58U Firmware: Merlin 386.1.2 DDNS: asuscomm.com Devices: iPhone 12 mini with iOS 14.4.1 and Macbook Pro macOS 11.2.3 DNS resolver: NextDNS (version 1.11.0 through merlinwrt nextdns cli) VPN-clients: Tunnelblick (mac), OpenVPN (iOS) and Instant Guard (iOS)...

I have OpenVPN client setup on my ASUS RT-AC86U using Merlin 384.19 and am wondering if I can direct say wired connections thru the VPN only, letting wireless not use VPN. If possible, I don't know how to make this happen. Thanks!

Hello, I've setup an OpenVPN Client on my router Asus RT-AC68U with Asuswrt-Merlin version 384.13_0 as follows: Force Internet traffic through tunnel: Policy Rules (strict) Rule: 192.168.24.0/24: VPN Accept DNS Configuration: Exclusive The VPN connection works fine but there is one problem...

Post moved to https://www.snbforums.com/forums/asuswrt-merlin.42 or directly https://www.snbforums.com/threads/dns-requests-not-routed-thru-vpn-on-asuswrt-merlin.60170

Hi, I have a simple task, but I don't know how to do it and if it's easy as it is to ask... I have an AC1900p (AC68u Merlin's firmware). I want to use it as the main router for my family. I also have the router from my ISP (which can't connect to VPN as client). I want to connect the ISP...

Does the DNS request goes over VPN tunnel or outside VPN tunnel on Asus Merlin firmware. If I Set DNS provided by VPN and Set Accept DNS Configuration to Strict. I know than VPN DNS will be used if I set it manually. Please tell me if the DNS request goes over VPN tunnel or outside VPN tunnel on...

Hi folks, I have an IPTV service that allows one connection for account. If i change public IP address, the IPTV not work for about ten minutes, then working again. I would like setup the connection to IPTV by VPN, but It work only if I set destination IP to 0.0.0.0. In this case, same service...

Long time reader, first time poster. I keep running into an issue with my VPN tunnel to PIA. It seems like the tunnel will drop (and need to be manually restarted) at least every other day. Is there a setting I should be using to help keep the tunnel up longer, or is there a way I can set the...

Hi, I’m new to this forum and fairly new to setting up VPNs. I’ve been searching on the internet and this forum but haven’t come up with anything that was relating to the problem I am facing. I’m having some trouble with VPN profiles on asus Merlin (389.68_4). I’ve got client 1 setup to use...

Hello Everyone, i'm Carlo from Italy: this is my first post on this forum :) (well it's the second :D ) I did search and i did try to find the answer to my need but i didnt find, so i'm very sorry if there is a post that answer me. I added a comment on antoehr thread but I dont know if it was...

Hello everyone! Here is my environment. AsusWRT-Merlin FW 380.67 on Asus RT-AC88U OpenVPN Client setup on my router using AirVPN OpenVPN Server enabled on my router with 10.8.0.0/24 Internal home LAN with 192.168.x.x/24 I have a FreeNAS server running multiple jails 192.168.1.26 =...

Dear all, Using lastest AsusWrt Merlin build here together with PIA (Private Internet Access) for specific clients on my network. Something really easy to do. But I wanted to do something different anda honestly I don't know if it's even possible. I would like to set transmission (which I'm...