slvrscoobie
Regular Contributor
Hi All,
I have an AC3100 and an AC1900 in Ai Mesh mode connected via Gigabit.
Last week we had a day long power outage, and since then Ive been having issues with internet speeds, connectivity and such. I have a lot of devices on my 2.4 band (bulbs, switches, couple low bandwidth cameras) but until the power outage it seemed ok. Ive noticed this in my logs a LOT recently.
I set the 2.4 band to Auto channel, its set on 20/40mhz as it was. even tried to reduce the RTS threshold to 1024 to see if that would help in 'congested areas'.
Ive hard rebooted them, main router first and left the node off till the main was backup.
Also turned off wifi on both and turned back on.
5ghz seems ok although some devices are getting connected to the node instead of the main router which is odd due to their locations.
Thoughts?
Jul 9 03:22:39 acsd: Adjusted channel spec: 0x100b (11)
Jul 9 03:22:39 acsd: selected channel spec: 0x100b (11)
Jul 9 03:22:40 acsd: eth1: NONACSD channel switching to channel spec: 0x100b (11)
Jul 9 03:22:41 acsd: eth1: NONACSD channel switching to channel spec: 0x1806 (4l)
Jul 9 03:23:52 acsd: selected channel spec: 0x100b (11)
Jul 9 03:23:52 acsd: Adjusted channel spec: 0x100b (11)
Jul 9 03:23:52 acsd: selected channel spec: 0x100b (11)
Jul 9 03:23:52 acsd: eth1: NONACSD channel switching to channel spec: 0x100b (11)
Jul 9 03:23:55 acsd: eth1: NONACSD channel switching to channel spec: 0x1806 (4l)
Jul 9 03:30:39 acsd: selected channel spec: 0x100b (11)
Jul 9 03:30:39 acsd: Adjusted channel spec: 0x100b (11)
Jul 9 03:30:39 acsd: selected channel spec: 0x100b (11)
Jul 9 03:38:34 acsd: selected channel spec: 0x100b (11)
Jul 9 03:38:34 acsd: Adjusted channel spec: 0x100b (11)
Jul 9 03:38:34 acsd: selected channel spec: 0x100b (11)
Jul 9 03:41:27 acsd: selected channel spec: 0x100b (11)
Jul 9 03:41:27 acsd: Adjusted channel spec: 0x100b (11)
Jul 9 03:41:27 acsd: selected channel spec: 0x100b (11)
Jul 9 03:41:28 acsd: eth1: NONACSD channel switching to channel spec: 0x100b (11)
Jul 9 03:41:32 acsd: eth1: NONACSD channel switching to channel spec: 0x1806 (4l)
...
Jul 9 08:43:16 acsd: selected channel spec: 0x1001 (1)
Jul 9 08:43:16 acsd: Adjusted channel spec: 0x1001 (1)
Jul 9 08:43:16 acsd: selected channel spec: 0x1001 (1)
Jul 9 08:44:43 acsd: selected channel spec: 0x1001 (1)
Jul 9 08:44:43 acsd: Adjusted channel spec: 0x1001 (1)
Jul 9 08:44:43 acsd: selected channel spec: 0x1001 (1)
Jul 9 08:44:44 acsd: eth1: NONACSD channel switching to channel spec: 0x1001 (1)
Jul 9 08:44:49 acsd: eth1: NONACSD channel switching to channel spec: 0x1806 (4l)
Jul 9 08:46:16 acsd: selected channel spec: 0x1001 (1)
Jul 9 08:46:16 acsd: Adjusted channel spec: 0x1001 (1)
Jul 9 08:46:16 acsd: selected channel spec: 0x1001 (1)
I have an AC3100 and an AC1900 in Ai Mesh mode connected via Gigabit.
Last week we had a day long power outage, and since then Ive been having issues with internet speeds, connectivity and such. I have a lot of devices on my 2.4 band (bulbs, switches, couple low bandwidth cameras) but until the power outage it seemed ok. Ive noticed this in my logs a LOT recently.
I set the 2.4 band to Auto channel, its set on 20/40mhz as it was. even tried to reduce the RTS threshold to 1024 to see if that would help in 'congested areas'.
Ive hard rebooted them, main router first and left the node off till the main was backup.
Also turned off wifi on both and turned back on.
5ghz seems ok although some devices are getting connected to the node instead of the main router which is odd due to their locations.
Thoughts?
Jul 9 03:22:39 acsd: Adjusted channel spec: 0x100b (11)
Jul 9 03:22:39 acsd: selected channel spec: 0x100b (11)
Jul 9 03:22:40 acsd: eth1: NONACSD channel switching to channel spec: 0x100b (11)
Jul 9 03:22:41 acsd: eth1: NONACSD channel switching to channel spec: 0x1806 (4l)
Jul 9 03:23:52 acsd: selected channel spec: 0x100b (11)
Jul 9 03:23:52 acsd: Adjusted channel spec: 0x100b (11)
Jul 9 03:23:52 acsd: selected channel spec: 0x100b (11)
Jul 9 03:23:52 acsd: eth1: NONACSD channel switching to channel spec: 0x100b (11)
Jul 9 03:23:55 acsd: eth1: NONACSD channel switching to channel spec: 0x1806 (4l)
Jul 9 03:30:39 acsd: selected channel spec: 0x100b (11)
Jul 9 03:30:39 acsd: Adjusted channel spec: 0x100b (11)
Jul 9 03:30:39 acsd: selected channel spec: 0x100b (11)
Jul 9 03:38:34 acsd: selected channel spec: 0x100b (11)
Jul 9 03:38:34 acsd: Adjusted channel spec: 0x100b (11)
Jul 9 03:38:34 acsd: selected channel spec: 0x100b (11)
Jul 9 03:41:27 acsd: selected channel spec: 0x100b (11)
Jul 9 03:41:27 acsd: Adjusted channel spec: 0x100b (11)
Jul 9 03:41:27 acsd: selected channel spec: 0x100b (11)
Jul 9 03:41:28 acsd: eth1: NONACSD channel switching to channel spec: 0x100b (11)
Jul 9 03:41:32 acsd: eth1: NONACSD channel switching to channel spec: 0x1806 (4l)
...
Jul 9 08:43:16 acsd: selected channel spec: 0x1001 (1)
Jul 9 08:43:16 acsd: Adjusted channel spec: 0x1001 (1)
Jul 9 08:43:16 acsd: selected channel spec: 0x1001 (1)
Jul 9 08:44:43 acsd: selected channel spec: 0x1001 (1)
Jul 9 08:44:43 acsd: Adjusted channel spec: 0x1001 (1)
Jul 9 08:44:43 acsd: selected channel spec: 0x1001 (1)
Jul 9 08:44:44 acsd: eth1: NONACSD channel switching to channel spec: 0x1001 (1)
Jul 9 08:44:49 acsd: eth1: NONACSD channel switching to channel spec: 0x1806 (4l)
Jul 9 08:46:16 acsd: selected channel spec: 0x1001 (1)
Jul 9 08:46:16 acsd: Adjusted channel spec: 0x1001 (1)
Jul 9 08:46:16 acsd: selected channel spec: 0x1001 (1)