Stephans
Occasional Visitor
Hi everybody,
I have some really annoying problems with the RT-AC3200 in bridge mode (Both router are same type and firmware)
Also have updated to the latest firmware from asus but still problems with clients trying connecting to the router.
Some clients show unindentified network status (no internet) on de media bridge side. This is sometimes /random after restarting the router and/or media bridge a couple of times the client al of the sudden gets an IP and the other client wich was connected before now gets disconnected. On the router (with internet connection) side I have no problems so far. Also have tried to update with the latest merlin version wich was better but not solving all the poblems. Merlin shows more clients connected though. In de network mapping the media bridge shows more clients than on the router side. Looks like it is not syncing correctly. I also have read that that I have to turn of smart connect. but still same problem. When I try to connect the media bridge to a 5ghz-2 channel it shows undefined (smart connect turned off or on) (see attachment). Also when installing a new hyper-v client for example it cannot contact the gateway to get an IP but after a few times restarting the router all of the sudden it can. What is going on here guy's it's really driving me nuts. Right now I'm running version 3.0.0.4.378.7838 Original from ASUS. But today I'm reverting it back again to the lastest Merlin version RT-AC3200_378.55_0 wich was better but not solving. Also the merlin version shows undefined when connecting the media bridge to the router. It looks like it cannot connect to that channel. Also have done a couple of factory resets with both version (Original from asus and Merlin).
Is there also a best practice to update the firmware to the lastest merlin version?
Thanks for your time reading this and hopefully somebody can help me out here.
Thanks.
Stephan
I have some really annoying problems with the RT-AC3200 in bridge mode (Both router are same type and firmware)
Also have updated to the latest firmware from asus but still problems with clients trying connecting to the router.
Some clients show unindentified network status (no internet) on de media bridge side. This is sometimes /random after restarting the router and/or media bridge a couple of times the client al of the sudden gets an IP and the other client wich was connected before now gets disconnected. On the router (with internet connection) side I have no problems so far. Also have tried to update with the latest merlin version wich was better but not solving all the poblems. Merlin shows more clients connected though. In de network mapping the media bridge shows more clients than on the router side. Looks like it is not syncing correctly. I also have read that that I have to turn of smart connect. but still same problem. When I try to connect the media bridge to a 5ghz-2 channel it shows undefined (smart connect turned off or on) (see attachment). Also when installing a new hyper-v client for example it cannot contact the gateway to get an IP but after a few times restarting the router all of the sudden it can. What is going on here guy's it's really driving me nuts. Right now I'm running version 3.0.0.4.378.7838 Original from ASUS. But today I'm reverting it back again to the lastest Merlin version RT-AC3200_378.55_0 wich was better but not solving. Also the merlin version shows undefined when connecting the media bridge to the router. It looks like it cannot connect to that channel. Also have done a couple of factory resets with both version (Original from asus and Merlin).
Is there also a best practice to update the firmware to the lastest merlin version?
Thanks for your time reading this and hopefully somebody can help me out here.
Thanks.
Stephan