Release ASUS RT-AX89X Firmware version 3.0.0.4.388_32407

[maxrhodes5]

Anybody having issues with IPV6 Native? I have comcast internet and after a day or two I lose internet IPV6 on my devices. Internal network works fine. Doesn't fix itself after reboot but if I toggle between IPV6 passthrough and back to native it starts working again. This is causing voice chat issues in games. My backup internet is T-Mobile and if I connect directly to the T-Mobile router IPV6 and chat works fine. Everything is default for Native and like I mentioned it works fine for a little bit and randomly stops. What is weird is I'm able to use ping -6 in the command prompt and it still works but my browser on the same computer and different devices stop. One other thing I might try is rebooting the cable modem daily if that could be causing the issue but I would figure a restart of the router would accomplish the same since toggling the settings works without resetting the cable modem. Thanks!

 

[Gustour]

I am only using IPV6 passthrough without any problems. Sry can't help

 

[aenertia]

I am unable to use 850nm Intel SFP+ over OM3 cabling with the last several releases; including this one. I have also tried the 2500sfp experiment.

I have tried in two seperate ax89x's ; these transcivers are listed in the QVL list ( https://www.asus.com/nz/support/FAQ/1044066/ )

Tried hard resets; replacing patch (patch and optics are confirmed working in mikrotik/qnap and Red hat linux with bnx2 based NIC). I am unsure what update SFP+ optics modules stopped working; as I have been using Copper 10G backhauls.

Normally ax89 is in AP only mode (routing done on a hosted NFV platform). I have also attempted to bring them up in Gateway mode (as this seems to expose additional settings for the SFP cage).

I see the EEPROM being read but no link activity on the ax89 side. Have tried changing 10Gbp forced mode on both sides (using mikrotik as terminating device), as well as toggling Fast/Low rate signalling on the mikrotik; and changing the toggles for TX Clock and Hardware offloads on the AX89x side.

May 5 05:05:32 kernel: [ 18.523956] ssdk_switch_register[1852]:INFO:interrupt is selected
May 5 05:05:32 kernel: [ 19.445778] SFP EEPROM VENDOR [Intel Corp] OUI [00-1B-21] PN [FTLX8571D3BCV-IT] REV [A]
May 5 05:05:32 kernel: [ 19.445783] SFP EEPROM Byte 0: 3, SFP/SFP+
May 5 05:05:32 kernel: [ 19.445787] SFP EEPROM Byte 3: 10, 10G base-SR
May 5 05:05:32 kernel: [ 19.445792] SFP EEPROM Byte 6: 1, 1000BASE-SX
May 5 05:05:32 kernel: [ 19.445795] SFP EEPROM Byte C: 67, 10300 Mbps
May 5 05:05:32 kernel: [ 19.445799] SFP EEPROM Byte 11: 3, 62.5um OM1 cable max. length 30m
May 5 05:05:32 kernel: [ 19.445801] SFP EEPROM Byte 10: 8, 50um OM2 cable max. length 80m
May 5 05:05:32 kernel: [ 19.445804] SFP EEPROM Byte 13: 1E, 50um OM3 cable max. length 300m
May 5 05:05:32 kernel: [ 19.445806] SFP EEPROM 00: 03 04 07 10 00 00 01 00-00 00 00 06 67 02 00 00-08 03 00 1E 49 6E 74 65-6C 20 43 6F 72 70 20 20 ............g.......Intel Corp
May 5 05:05:32 kernel: [ 19.445845] SFP EEPROM 01: 20 20 20 20 00 00 1B 21-46 54 4C 58 38 35 37 31-44 33 42 43 56 2D 49 54-41 20 20 20 03 52 00 88 ...!FTLX8571D3BCV-ITA .R..
May 5 05:05:32 kernel: [ 19.445883] SFP EEPROM 02: 00 3A 00 00 4D 55 39 30-45 53 36 20 20 20 20 20-20 20 20 20 31 35 30 39-31 33 20 20 68 FA 03 0B .:..MU90ES6 150913 h...
May 5 05:05:32 kernel: [ 19.445920] SFP EEPROM 03: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................................
May 5 05:05:32 kernel: [ 19.445958] SFP EEPROM 04: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................................
May 5 05:05:32 kernel: [ 19.445995] SFP EEPROM 05: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................................
May 5 05:05:32 kernel: [ 19.446033] SFP EEPROM 06: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................................
May 5 05:05:32 kernel: [ 19.446070] SFP EEPROM 07: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................................
May 5 05:05:32 kernel: [ 19.446266] sfp_phy_interface_get_mode_status[683]:INFO:sfp module speed: 10300 interface_mode_status 8 (limit 0)
May 5 05:05:32 kernel: [ 20.235398] regi_init[3658]:INFO:Initializing ISISC Done!!
May 5 05:05:32 kernel: [ 20.235448] regi_init[3728]:INFO:qca-ssdk module init succeeded!

Please ignore timestamps - this is from a freshly reset node.

 

[aaronwt]

I'm using a QSFPTEK 10G SFP+ SR Module, 10GBASE-SR in my RT-AX89X. Going to another same Fiber module in a Zyxel XGS1250-2 Switch. It's always been a rock solid 10Gbps connection.