ASUS RT-BE92U Firmware version 3.0.0.6.102_38962 (2025/08/27)

[Spartan]

Download = https://www.asus.com/networking-iot...-be92u/helpdesk_bios?model2Name=ASUS-RT-BE92U

ASUS RT-BE92U Firmware version 3.0.0.6.102_38962
Version 3.0.0.6.102_38962
53.28 MB
2025/08/27
SHA-256 ：DEC7562F9F584E7E8BFDCC10EEDF452689979DA79530606A47941CE8D5F36D3B
Optimized AiMesh connection stability for a more reliable mesh networking experience.

 

[martix]

Since updating to version 3.0.0.6.102_38962, I've noticed an improvement in Wi-Fi coverage compared to previous versions. When I compare the data in the Wi-Fi history section, my devices seem to receive a stronger signal and Channel Utilization is lower.

Memory usage is also slightly lower: previously it hovered around 80% - 82%, now it's between 78% and 80%, which is a small but welcome change.

I haven't experienced any reboots or crashes. The only exception was once, following a disconnection of my fiber box, when I saw the following message in the logs:rc_service: waitting "restart_wan_if 0"(last_rc:restart_wan_if 0) via wanduck
However, this didn’t affect the router’s functionality.
I restarted both my internet box and the router, and the message disappeared.

 

[GJJ]

Since updating to version 3.0.0.6.102_38962, I've noticed an improvement in Wi-Fi coverage compared to previous versions. When I compare the data in the Wi-Fi history section, my devices seem to receive a stronger signal and Channel Utilization is lower.

Memory usage is also slightly lower: previously it hovered around 80% - 82%, now it's between 78% and 80%, which is a small but welcome change.

I haven't experienced any reboots or crashes. The only exception was once, following a disconnection of my fiber box, when I saw the following message in the logs:rc_service: waitting "restart_wan_if 0"(last_rc:restart_wan_if 0) via wanduck
However, this didn’t affect the router’s functionality.
I restarted both my internet box and the router, and the message disappeared.

I've also noticed an improvement on the memory utilisation with this release. In the day or so since I upgraded, it used a little less memory than previous releases, but unlike previous releases, the usage hasn't increased or is increasing very slowly. It's been 9 days since I have upgraded and it is still hovering around 244MB-245MB free memory. In previous releases it would slowly drop day by day, until it got to just below 200MB free over a month. Of course, different users will see different amounts of free memory, dependant on their settings, usage and clients.
(I've also enabled Adaptive QOS on this release for the first time and so far so good.)

Not very scientific, but the log "looks" more uniform as well. I don't know what most of the entries are, but there seems to be less different entries now. I still get occasional MLO entries once a day or 2, even though I have it switched off. Again, different users and use cases will see different things.

As I have mentioned in previous posts, I've been lucky and my router has been stable/hasn't crashed in the time that I have had it, so I hope it is getting better for the users who have been having issues with it.

GJ