Thorgear
Regular Contributor
I'm using Shibby 1.28.0000 MIPSR2-135 K26 USB AIO-64K on an ASUS N66. I haven't been able to get QOS or BL working until now. I'm trying to limit BL on 10.0.1.96. The relevant lines from /etc/qoslimit are:
tc class add dev br0 parent 1:1 classid 1:10 htb rate 100kbit ceil 1000kbit prio 2
tc qdisc add dev br0 parent 1:10 handle 10: sfq perturb 10
tc filter add dev br0 parent 1:0 prio 2 handle 10 fw flowid 1:10
tc class add dev vlan2 parent 2:1 classid 2:10 htb rate 100kbit ceil 1000kbit prio 2
tc qdisc add dev vlan2 parent 2:10 handle 10: sfq perturb 10
tc filter add dev vlan2 parent 2:0 prio 2 handle 10 fw flowid 2:10
They don't work. However, when I get rid of "protocol ip", it works great. It looks like I'll have to go around the GUI for BL on individual IPs. That's fine, but I can't figure out how the TC commands are linked to the IP.
Anyone know?
tc class add dev br0 parent 1:1 classid 1:10 htb rate 100kbit ceil 1000kbit prio 2
tc qdisc add dev br0 parent 1:10 handle 10: sfq perturb 10
tc filter add dev br0 parent 1:0 prio 2 handle 10 fw flowid 1:10
tc class add dev vlan2 parent 2:1 classid 2:10 htb rate 100kbit ceil 1000kbit prio 2
tc qdisc add dev vlan2 parent 2:10 handle 10: sfq perturb 10
tc filter add dev vlan2 parent 2:0 prio 2 handle 10 fw flowid 2:10
They don't work. However, when I get rid of "protocol ip", it works great. It looks like I'll have to go around the GUI for BL on individual IPs. That's fine, but I can't figure out how the TC commands are linked to the IP.
Anyone know?
Last edited: