Hi There,
I'm one more victims of last Netgear silent upgrade.
I wanted to revert back to older firmware, and I started to see strange behaviours.
I may have interrupted the upgrade process at some point, but I'm not even sure I did.
Anyway, since my out of warranty orbi RBR50 is stuck at boot, I wen ahead and purchase a console cable as I could see that there are options from the console which may help.
Now I checked various parameters like the model and the board ID and model ID, but everything looks good.
I tried to upload a fresh firmware from there and everything went smooth, but still it refuses to boot properly saying that I have CRC errors when loading the kernel.
Shall I ask for your expertise, please ?
Attached is the console boot log
I'm one more victims of last Netgear silent upgrade.
I wanted to revert back to older firmware, and I started to see strange behaviours.
I may have interrupted the upgrade process at some point, but I'm not even sure I did.
Anyway, since my out of warranty orbi RBR50 is stuck at boot, I wen ahead and purchase a console cable as I could see that there are options from the console which may help.
Now I checked various parameters like the model and the board ID and model ID, but everything looks good.
I tried to upload a fresh firmware from there and everything went smooth, but still it refuses to boot properly saying that I have CRC errors when loading the kernel.
Shall I ask for your expertise, please ?
Attached is the console boot log
Code:
## Checking hash(es) for FIT Image at 84000000 …
Hash(es) for Image 0 (kernel@1): crc32 error!
Bad hash value for ‘hash@1’ hash node in ‘kernel@1’ image node
Bad hash in FIT image!
linux checksum error
Code:
## Checking Image at 8433ffc0 …
Legacy image found
Image Name: ARM OpenWrt Linux-3.14.77
Image Type: ARM Linux Kernel Image (lzma compressed)
Data Size: 43255808 Bytes = 41.3 MiB
Load Address: 40908000
Entry Point: 40908000
Verifying Checksum … Bad Data CRC
rootfs checksum error
Code:
## Booting kernel from FIT Image at 84000000 …
Using ‘config@1’ configuration
Trying ‘kernel@1’ kernel subimage
Description: ARM OpenWrt Linux-3.14.77
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x840000e4
Data Size: 3056345 Bytes = 2.9 MiB
Architecture: ARM
OS: Linux
Load Address: 0x80208000
Entry Point: 0x80208000
Hash algo: crc32
Hash value: ac0df93c
Hash algo: sha1
Hash value: 3fa6b3cd9c765ae1a1711678a9acc214ce0c5252
Verifying Hash Integrity … crc32 error!
Bad hash value for ‘hash@1’ hash node in ‘kernel@1’ image node
Bad Data Hash
ERROR: can’t get kernel image!
Attachments
Last edited: