Clearing out SSH rules from router

[jjulez]

How is this done and what will i lose ..thanks

 

[ColinTaylor]

What "SSH rules" are you talking about? Post a screenshot.

 

[jjulez]

Sorry don't have screen capture....this i want clear out or complete clearing >>> wrong ports was entered
iptables -I FORWARD -i tun1 -p udp -d destIP --dport port -j ACCEPT
iptables -I FORWARD -i tun1 -p tcp -d destIP --dport port -j ACCEPT
iptables -t nat -I PREROUTING -i tun1 -p tcp --dport port -j DNAT --to-destination destIP
iptables -t nat -I PREROUTING -i tun1 -p udp --dport port -j DNAT --to-destination destIP

 

[ColinTaylor]

Where are you seeing this?

Those lines don't look like anything that's normally created by the router. You must have done this yourself. We can't guess what you have done.

Or did you just type those commands directly into the SSH command line?

 

[jjulez]

That's the command without the ports & ip's etc. i entered the wrong port number

 

[ColinTaylor]

The quickest way to wipe out all non-persistent rules is to either reboot the router or enter the following command:

service restart_firewall

Alternatively, you could enter exactly the same commands again but replace -I with -D.

iptables(8) - Linux manual page

 

[jjulez]

ok thanks very much

 

[jjulez]

So this means whenever i have a power outage or reboot i lose the rules? Anyway around this ?

 

[ColinTaylor]

You haven't said what router you have or what firmware it's using.

 

[jjulez]

RT-AX86U Latest merlin Thanks Colin

 

[ColinTaylor]

Describe in as much detail as possible what it is you're trying to achieve.

 

[jjulez]

I was asking if the router lose power or was rebooted would it also lose the ssh rules i put in

 

[ColinTaylor]

I was asking if the router lose power or was rebooted would it also lose the ssh rules i put in

Yes it will. I said that in post #6.

Then you asked "Anyway around this ?". To answer that question you need to provide more information.

 

[jjulez]

I only need those rules for remote connections like Plex, Emby. i don't want to be putting it in everytime i reboot or lose power

 

[rung]

So the "WAN - Virtual Server / Port Forwarding" in the GUI doesn't work for your needs?

 

[jjulez]

So the "WAN - Virtual Server / Port Forwarding" in the GUI doesn't work for your needs?

Nope not with this vpn and merlin