how to add such a static route in the web interface ?!

[CrashXRu]

how to add such a static route in the web interface

route -n add -net 192.168.99.0 netmask 255.255.255.0 ppp5

you need to see the network for nat when connected via pptp vpn

it is inconvenient to execute this command every time I connect to vpn

 

[Lynx]

Incase it helps, I added a static route in the OpenVPN client config from my router (192.168.1.1) to my modem (192.168.8.1) in order to work with 'force internet traffic through tunnel: yes', by adding this line at the end of the custom config:

route 192.168.8.1 255.255.255.255 net_gateway

 

[CrashXRu]

you did not understand,
I need to add a route using the web interface
how to do it in the SSH know

BUT
Linux has such options
ip-up-script / tmp / ppp / vpnc-ip-up
ip-down-script / tmp / ppp / vpnc-ip-down
ip-pre-up-script / tmp / ppp / vpnc-ip-pre-up
auth-fail-script / tmp / ppp / vpnc-auth-fail


but in the router there is no such possibility

I also can't figure out how to add static routes to the web, the ones that I write with my hands in the ssh