Hi,
I have a pretty strange problem I can't seem to solve on my own.
My setup:
- Technicolor CGA2121 cable modem set to BRIDGE MODE
-> RT-AC86U
-> my various PCs (work perfect, full speed)
-> my Xboxes (360,X1X,XSX) (work perfect, full speed)
-> my Playstations (3,4,5) - THEY CAN'T EVEN CONNECT
Situation 1: With everything set to default, what happens is I get a WAN IP (dhcp) and everything works fine for a minute (even Playstation connectivity- then connection drops ("Your ISP'S DHCP does not function properly"). This is obviously unusable.
Situation 2: I set "Spoof LAN TTL value" in the WAN config and suddenly everything works and connection doesn't drop - but Playstation connectivity is borked ("failed" when checking internet access).
I have no idea what to do. At some point I managed to get PS connectivity up, but at sub 100kbit speeds, while everything else worked full speed.
The settings I played around with:
LAN -> IPTV -> enable multicast routing
WAN -> Extend the TTL value
Disable Firewall
I tried on official FW (RT-AC86U_3.0.0.4_386_40451-g30f1b6c) and on Merlin (RT-AC86U_384.19_0), same problem.
Before buying RT-AC86U, I was on TL-WR1043ND and everything just worked.
Any help would be greatly appreciated.
Apologies if I put this in the wrong forum, seemed like the best fit.
I have a pretty strange problem I can't seem to solve on my own.
My setup:
- Technicolor CGA2121 cable modem set to BRIDGE MODE
-> RT-AC86U
-> my various PCs (work perfect, full speed)
-> my Xboxes (360,X1X,XSX) (work perfect, full speed)
-> my Playstations (3,4,5) - THEY CAN'T EVEN CONNECT
Situation 1: With everything set to default, what happens is I get a WAN IP (dhcp) and everything works fine for a minute (even Playstation connectivity- then connection drops ("Your ISP'S DHCP does not function properly"). This is obviously unusable.
Situation 2: I set "Spoof LAN TTL value" in the WAN config and suddenly everything works and connection doesn't drop - but Playstation connectivity is borked ("failed" when checking internet access).
I have no idea what to do. At some point I managed to get PS connectivity up, but at sub 100kbit speeds, while everything else worked full speed.
The settings I played around with:
LAN -> IPTV -> enable multicast routing
WAN -> Extend the TTL value
Disable Firewall
I tried on official FW (RT-AC86U_3.0.0.4_386_40451-g30f1b6c) and on Merlin (RT-AC86U_384.19_0), same problem.
Before buying RT-AC86U, I was on TL-WR1043ND and everything just worked.
Any help would be greatly appreciated.
Apologies if I put this in the wrong forum, seemed like the best fit.