Jack Yaz
Part of the Furniture
v4.4.5
Updated 2022-12-28
spdMerlin is an internet speedtest and monitoring tool for AsusWRT Merlin with charts for daily, weekly and monthly summaries. It tracks download/upload bandwidth as well as latency, jitter and packet loss.
spdMerlin is free to use under the GNU General Public License version 3 (GPL 3.0).
spdMerlin uses Speedtest CLI
spdMerlin includes the required licenses, which must be accepted on install of spdMerlin.
As of spdMerlin v4.4.0 the Asus built-in Ookla speedtest binary is used to run the speedtests.
This script began as a user-friendly installer for a personal project developed by JGrana
A swap file is required.
This project is hosted on GitHub
Love the script and want to support future development? Any and all donations gratefully received!
PayPal donation
Supported firmware versions
You must be running firmware Merlin 384.15/384.13_4 or Fork 43E5 (or later) Asuswrt-Merlin
Installation
Using your preferred SSH client/terminal, copy and paste the following command, then press Enter:
Usage
WebUI
spdMerlin can be configured via the WebUI, in the Addons section.
Command Line
To launch the spdMerlin menu after installation, use:
If this does not work, you will need to use the full path:
Updated 2022-12-28
spdMerlin is an internet speedtest and monitoring tool for AsusWRT Merlin with charts for daily, weekly and monthly summaries. It tracks download/upload bandwidth as well as latency, jitter and packet loss.
spdMerlin is free to use under the GNU General Public License version 3 (GPL 3.0).
spdMerlin uses Speedtest CLI
spdMerlin includes the required licenses, which must be accepted on install of spdMerlin.
As of spdMerlin v4.4.0 the Asus built-in Ookla speedtest binary is used to run the speedtests.
This script began as a user-friendly installer for a personal project developed by JGrana
A swap file is required.
This project is hosted on GitHub
Love the script and want to support future development? Any and all donations gratefully received!
PayPal donation
Supported firmware versions
You must be running firmware Merlin 384.15/384.13_4 or Fork 43E5 (or later) Asuswrt-Merlin
Installation
Using your preferred SSH client/terminal, copy and paste the following command, then press Enter:
Code:
/usr/sbin/curl --retry 3 "https://raw.githubusercontent.com/jackyaz/spdMerlin/master/spdmerlin.sh" -o "/jffs/scripts/spdmerlin" && chmod 0755 /jffs/scripts/spdmerlin && /jffs/scripts/spdmerlin install
Usage
WebUI
spdMerlin can be configured via the WebUI, in the Addons section.
Command Line
To launch the spdMerlin menu after installation, use:
Code:
spdmerlin
If this does not work, you will need to use the full path:
Code:
/jffs/scripts/spdmerlin
Last edited: