Menu
What's new
By:
Filters Better Search

Recent content by glitchsys

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. G

    Can't change "New device" or icon in DHCP server / manually assigned section

    Ok I think I partially solved the issue. Apparently when adding mac addresses in the DHCP server section you need to go all capitals, don't use lower case. When you do that, you're able to edit the name and icon. Once you've done that, the "Client Status" section of the network map will sync...
  2. G

    Network Map/View list brings popup with no entries

    So this issue still exists even after I added all the Static DHCP Mac addresses as upper case. The "Tx Rate" and "Rx Rate" columns are interesting. Maybe this only works when real time per device monitoring or graphing is enabled? Still, it's misleading to say "View List" next to the number of...
  3. G

    "This entry has been in list" ?

    Ok I think I partially solved the issue. Apparently when adding mac addresses in the DHCP server section you need to go all capitals, don't use lower case. When you do that, you're able to edit the name and icon. Once you've done that, the "Client Status" section of the network map will sync...
  4. G

    "This entry has been in list" ?

    What is the relationship between adding mac addresses and static IP's in the DHCP Server tab vs doing it via the Client Status section on the network map? I see several of my devices but this time some have different icons as well as extra options at the bottom like "Block Internet Access" and...
  5. G

    Can't change "New device" or icon in DHCP server / manually assigned section

    So in LAN/DHCP Server/"Manually Assigned IP around the DHCP list" I was adding mac addresses and hostnames. But every device I added had the name "New device" above the mac address, but on the right under hostname I did see the hostname I added. When I clicked on the default icon of the...
  6. G

    Network Map/View list brings popup with no entries

    On the network map I see 23 clients on my network. When I click on "View List" a pop up window comes up and shows no devices. If I click on "By Interface" or back to "All" still nothing. I don't see any clients on my network. If I click on the actual monitor/computer icon above "View List"...
  7. G

    Problem with hard disk on RT-AC68U with Asuswrt-Merlin 380.59

    I'm having a problem with my USB3 enclosure being detected in the USB3 port, it works fine in the USB2 port. It has a 4tb hard drive formatted ext4 in it. It's a Rosewill enclosure using a ASMEDIA 1051 chipset. It used to work fine in the USB3 port but stopped after a recent Merlin FW upgrade...
  8. G

    RT-AC68U & Firmware:380.59

    Strange. I have 380.59 on my RT-AC68U and my wireless performance is normal. Are you using the same laptop/device for testing? Are you only going off speedtest.net? Have you checked what speed the laptop "thinks" it is getting to the wireless? Like on my macbook pro I can hold down option and...
  9. G

    HELP - USB disks no longer working!

    I have an external USB 3.0 hard drive that was working in my Asus AC68U but stopped recently. It's got a 4tb drive formatted ext3 but it always worked and suddenly didn't, it wasn't being detected at all. On a whim I plugged it into my USB 2 port of my Asus and it was suddenly it was detected...
  10. G

    Sandisk Extreme USB3 flash not detected in Asus rt-ac68-u

    I have an external USB 3.0 hard drive that was working in my Asus AC68U but stopped recently. It's got a 4tb drive formatted ext3 but it always worked and suddenly didn't, it wasn't being detected at all. On a whim I plugged it into my USB 2 port of my Asus and it was suddenly it was detected...
  11. G

    External Asmedia USB3 hard drive no longer recognized on USB3 port but fine on USB2

    And I did connect the drive to my laptop's USB 3.0 port and it worked fine.
  12. G

    External Asmedia USB3 hard drive no longer recognized on USB3 port but fine on USB2

    Ok so I have a external hard drive, Rosewill RX 358 U3C which uses the AsMedia 1051 chipset. It's been working fine in the router, in the USB3 port, for many months but recently I noticed it's no longer showing up. I'm not sure if it coincides with my latest upgrade to 380.59 but either way, the...
    • glitchsys
    • Thread
    • hard drive harddisk harddrive usb usb-storage usb2 usb3 usb_storage
    • Replies: 1
    • Forum: Asuswrt-Merlin
  13. G

    RT-AC68U Dual wan question

    Curious about Dual WAN myself Ok so my current setup is my 50mbps/5mbps cable modem and then I have a 6mbps/1mbps DSL modem as backup. I work completely from home as a Linux Administrator and my internet is mission critical to my income, thus my 2 internet connections coming across 2 different...
See more
Top